Eaton Wiring 0.30-0.43" Bus Drop Safety Grip, Single Eye, 1100lb Max. Capacity, Stainless Steel

Eaton Wiring BDS30SST
SKU ETW-BDS30SST
Eaton Wiring's 0.30-0.43" Single Eye Safety Grip in Stainless Steel is easy to install and relieves tension and absorbs vibration made from electrical connections. Shop HomElectrical for a wide variety of Safety Grips today!
Eaton Wiring 0.30-0.43" Bus Drop Safety Grip, Single Eye, 1100lb Max. Capacity, Stainless Steel

Image may not depict product actual color, inclusions or accessories

Eaton Wiring's 0.30-0.43" Single Eye Safety Grip in Stainless Steel is easy to install and relieves tension and absorbs vibration made from electrical connections. Shop HomElectrical for a wide variety of Safety Grips today!
CSA US

Eaton Wiring 0.30-0.43" Bus Drop Safety Grip, Single Eye, 1100lb MaximumCapacity, Stainless Steel features:

  • Indoor and outdoor use only, light-duty applications.
  • Support weight of overhead flexible cables or bus drop cables.
  • Relieve the strain, pull, vibration and flexing on wire connections of electrical equipment.
  • Can be used with optional bus drop safety spring to reduce tension and prevent pullout to avoid accidents and costly downtime.
  • Gripping action increases in direct proportion to the amount of tension applied to cable.
  • Wide range construction from high strength galvanized steel wire.
  • Easy installation requiring no special tools.
  • Optional bus drop safety spring can be used with single eye type by disassembling draw bar from coil, placing through eye loop and replacing draw bar.
  • Single eye for use when cable is vertical and for applications where cable bends.
  • Cable Range: 0.30"-0.43".
  • Mesh Length: 4.5".
  • Bale Length: 9".
CSA US

Eaton Wiring BDS30SST Description

CSA US

Eaton Wiring 0.30-0.43" Bus Drop Safety Grip, Single Eye, 1100lb MaximumCapacity, Stainless Steel features:

  • Indoor and outdoor use only, light-duty applications.
  • Support weight of overhead flexible cables or bus drop cables.
  • Relieve the strain, pull, vibration and flexing on wire connections of electrical equipment.
  • Can be used with optional bus drop safety spring to reduce tension and prevent pullout to avoid accidents and costly downtime.
  • Gripping action increases in direct proportion to the amount of tension applied to cable.
  • Wide range construction from high strength galvanized steel wire.
  • Easy installation requiring no special tools.
  • Optional bus drop safety spring can be used with single eye type by disassembling draw bar from coil, placing through eye loop and replacing draw bar.
  • Single eye for use when cable is vertical and for applications where cable bends.
  • Cable Range: 0.30"-0.43".
  • Mesh Length: 4.5".
  • Bale Length: 9".
CSA US

This page is for your reference only.
Shop for similar Strain Relief Cord Grip

Product Specifications

Part NumberBDS30SST
CertificateCSA US
MaterialSteel
Product Dimensions9.50-in X 1-in X 0.25-in
Weight0.07-lb
UPC040893679709
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Eaton Wiring's 0.30-0.43" Single Eye Safety Grip in Stainless Steel is easy to install and relieves tension and absorbs vibration made from electrical connections. Shop HomElectrical for a wide variety of Safety Grips today!
Eaton Wiring 0.30-0.43" Bus Drop Safety Grip, Single Eye, 1100lb Max. Capacity, Stainless Steel

This page is for your reference only.
Shop for similar Strain Relief Cord Grip

Eaton Wiring BDS30SST Description

CSA US

Eaton Wiring 0.30-0.43" Bus Drop Safety Grip, Single Eye, 1100lb MaximumCapacity, Stainless Steel features:

  • Indoor and outdoor use only, light-duty applications.
  • Support weight of overhead flexible cables or bus drop cables.
  • Relieve the strain, pull, vibration and flexing on wire connections of electrical equipment.
  • Can be used with optional bus drop safety spring to reduce tension and prevent pullout to avoid accidents and costly downtime.
  • Gripping action increases in direct proportion to the amount of tension applied to cable.
  • Wide range construction from high strength galvanized steel wire.
  • Easy installation requiring no special tools.
  • Optional bus drop safety spring can be used with single eye type by disassembling draw bar from coil, placing through eye loop and replacing draw bar.
  • Single eye for use when cable is vertical and for applications where cable bends.
  • Cable Range: 0.30"-0.43".
  • Mesh Length: 4.5".
  • Bale Length: 9".

Product Specifications

Part NumberBDS30SST
CertificateCSA US
MaterialSteel
Product Dimensions9.50-in X 1-in X 0.25-in
Weight0.07-lb
UPC040893679709
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.

Product Questions & Answers

Customer Reviews

0 out of 5
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%
Need Assistance?