Stelpro 10000W ADR-II Ceiling Fan Heater w/ 240V Control, 34127 BTU/H, 277V, Off White
Stelpro ADRII1071CSW
SKU STP-ADRII1071CSW
This ceiling heater is well suited for building entryways, stairwells, warehouses, garages, workshops and hallways. Shop our full selection of Stelpro heaters at HomElectrical now!
Image may not depict product actual color, inclusions or accessories
This ceiling heater is well suited for building entryways, stairwells, warehouses, garages, workshops and hallways. Shop our full selection of Stelpro heaters at HomElectrical now!
- Fast temperature rise via heat recovery.
- Ideal for building entryway, warehouse, stairwell, garage or workshop.
- Epoxy-polyester powder coat.
- 20-gauge steel cabinet and 14-gauge steel grille.
- Quiet helicoidal fan.
- Thermal protection with automatic reset.
- Totally enclosed, permanently lubricated motor.
- Nichrome element produces instant heat.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended (up to 4000W).
- Stelpro Wall Thermostat sold separately
- Fan-only mode for continuous air circulation, controlled by built-in selection switch.
- Heating mode, confirmed by pilot light when heating is on.
- Connection of multiple units to the same thermostat is possible with a relay kit without a transformer (optional) and an external transformer (not provided).
- Relay Kit sold separately
- Ceiling surface mounted with bracket to support unit during wiring (included).
- T-Bar adapter (optional).
- T-Bar Adapter sold separately
- CSA US.
Similar Ceiling Heater - Up To 1000 Sq. Ft. Products
Stelpro ADRII1071CSW Description
- Fast temperature rise via heat recovery.
- Ideal for building entryway, warehouse, stairwell, garage or workshop.
- Epoxy-polyester powder coat.
- 20-gauge steel cabinet and 14-gauge steel grille.
- Quiet helicoidal fan.
- Thermal protection with automatic reset.
- Totally enclosed, permanently lubricated motor.
- Nichrome element produces instant heat.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended (up to 4000W).
- Stelpro Wall Thermostat sold separately
- Fan-only mode for continuous air circulation, controlled by built-in selection switch.
- Heating mode, confirmed by pilot light when heating is on.
- Connection of multiple units to the same thermostat is possible with a relay kit without a transformer (optional) and an external transformer (not provided).
- Relay Kit sold separately
- Ceiling surface mounted with bracket to support unit during wiring (included).
- T-Bar adapter (optional).
- T-Bar Adapter sold separately
- CSA US.
Similar Ceiling Heater - Up To 1000 Sq. Ft. Products
Color / Finish
Off White
sku STP-ADRII1071CSW
Free Shipping
$1,807.04Each
Usually Ships 1-2 Months
Product Specifications
| Part Number | ADRII1071CSW |
| Air Flow (CFM) | 700 |
| Certificate | CSA US |
| Color / Finish | Off White |
| Material | Steel |
| Maximum Voltage | 277V |
| Warranty | 3 Yr |
| Wattage | 10000W |
| Product Dimensions | 22.37-in X 22.37-in X 6.56-in |
| Weight | 45.00-lb |
| UPC | 626296331224 |
Manufacturer Description
CEIL.ADR-II SOFT WHITE C240 10000W 277V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This ceiling heater is well suited for building entryways, stairwells, warehouses, garages, workshops and hallways. Shop our full selection of Stelpro heaters at HomElectrical now!
Color / Finish
Off White
sku STP-ADRII1071CSW
Free Shipping
$1,807.04Each
Usually Ships 1-2 Months
Similar Ceiling Heater - Up To 1000 Sq. Ft. Products
Stelpro ADRII1071CSW Description
- Fast temperature rise via heat recovery.
- Ideal for building entryway, warehouse, stairwell, garage or workshop.
- Epoxy-polyester powder coat.
- 20-gauge steel cabinet and 14-gauge steel grille.
- Quiet helicoidal fan.
- Thermal protection with automatic reset.
- Totally enclosed, permanently lubricated motor.
- Nichrome element produces instant heat.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended (up to 4000W).
- Stelpro Wall Thermostat sold separately
- Fan-only mode for continuous air circulation, controlled by built-in selection switch.
- Heating mode, confirmed by pilot light when heating is on.
- Connection of multiple units to the same thermostat is possible with a relay kit without a transformer (optional) and an external transformer (not provided).
- Relay Kit sold separately
- Ceiling surface mounted with bracket to support unit during wiring (included).
- T-Bar adapter (optional).
- T-Bar Adapter sold separately
- CSA US.
Product Specifications
| Part Number | ADRII1071CSW |
| Air Flow (CFM) | 700 |
| Certificate | CSA US |
| Color / Finish | Off White |
| Material | Steel |
| Maximum Voltage | 277V |
| Warranty | 3 Yr |
| Wattage | 10000W |
| Product Dimensions | 22.37-in X 22.37-in X 6.56-in |
| Weight | 45.00-lb |
| UPC | 626296331224 |
Manufacturer Description
CEIL.ADR-II SOFT WHITE C240 10000W 277V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?