Eaton Wiring 1000W Dual Switch w/ Nightlight, Vacancy, 1000 sq ft. Range, Almond
Eaton Wiring VS310R-A
SKU ETW-VS310RA
Eaton's occupany & vacancy sensors replaces a standard light switch, works with popular load types, & comes with mid-size decora wall plates. Shop HomElectrical for more high-quality motion sensors today!
Image may not depict product actual color, inclusions or accessories
Eaton's occupany & vacancy sensors replaces a standard light switch, works with popular load types, & comes with mid-size decora wall plates. Shop HomElectrical for more high-quality motion sensors today!
Eaton Wiring 1000W Dual Switch w/ Nightlight, Vacancy, 1000 sq ft. Range, Almond features:
- Can be wired as a single-pole or 3-way device.
- Selectable ON/OFF LED nightlight with press & hold dimming.
- Contains 2 switches to control 2 independent lighting loads or circuits.
- Green LED indicates load status, provides locator light in dark & blinks to indicate motion detection.
- Provides 180 degree field of view & 1000 sq. ft. of major motion coverage.
- Provides 3-way operation when used with a 3-way switch or sensor.
- Selectable time delay of 5 seconds, 5 minutes, 15 minutes, & 30 minutes for lights to remain ON after leaving a room.
- Reverse mode allows light to stay OFF in a room where motion is detected.
- Occupancy sensor provides ambient light override preventing lights from switching ON when there is acceptable natural light.
- Provides for a by-pass feature to allow the sensor to perform as a traditional switch.
- Replaces a standard light or fan switch.
- Neutral is required for device installation.
- Mid-Sized decora wallplate included with product.
Similar In-Wall Occupancy & Motion Sensor Products
Eaton Wiring VS310R-A Description
Eaton Wiring 1000W Dual Switch w/ Nightlight, Vacancy, 1000 sq ft. Range, Almond features:
- Can be wired as a single-pole or 3-way device.
- Selectable ON/OFF LED nightlight with press & hold dimming.
- Contains 2 switches to control 2 independent lighting loads or circuits.
- Green LED indicates load status, provides locator light in dark & blinks to indicate motion detection.
- Provides 180 degree field of view & 1000 sq. ft. of major motion coverage.
- Provides 3-way operation when used with a 3-way switch or sensor.
- Selectable time delay of 5 seconds, 5 minutes, 15 minutes, & 30 minutes for lights to remain ON after leaving a room.
- Reverse mode allows light to stay OFF in a room where motion is detected.
- Occupancy sensor provides ambient light override preventing lights from switching ON when there is acceptable natural light.
- Provides for a by-pass feature to allow the sensor to perform as a traditional switch.
- Replaces a standard light or fan switch.
- Neutral is required for device installation.
- Mid-Sized decora wallplate included with product.
Similar In-Wall Occupancy & Motion Sensor Products
Color / Finish
Almond
sku ETW-VS310RA
Free Shipping Eligible
$39.51Each
Usually Ships 8-14 Business Days
Product Specifications
| Part Number | VS310R-A |
| Certificate | cUL/UL Listed |
| Color / Finish | Almond |
| Material | Polycarbonate |
| Maximum Voltage | 120V |
| Wattage | 1000W |
| Product Dimensions | 3.31-in X 2.84-in X 5.39-in |
| Weight | 50.50-lb |
| UPC | 032664710537 |
Manufacturer Description
Vac. Switch,DR,SP/3W,1000W,UNV,NLight,AL
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Eaton's occupany & vacancy sensors replaces a standard light switch, works with popular load types, & comes with mid-size decora wall plates. Shop HomElectrical for more high-quality motion sensors today!
Color / Finish
Almond
sku ETW-VS310RA
Free Shipping Eligible
$39.51Each
Usually Ships 8-14 Business Days
Similar In-Wall Occupancy & Motion Sensor Products
Eaton Wiring VS310R-A Description
Eaton Wiring 1000W Dual Switch w/ Nightlight, Vacancy, 1000 sq ft. Range, Almond features:
- Can be wired as a single-pole or 3-way device.
- Selectable ON/OFF LED nightlight with press & hold dimming.
- Contains 2 switches to control 2 independent lighting loads or circuits.
- Green LED indicates load status, provides locator light in dark & blinks to indicate motion detection.
- Provides 180 degree field of view & 1000 sq. ft. of major motion coverage.
- Provides 3-way operation when used with a 3-way switch or sensor.
- Selectable time delay of 5 seconds, 5 minutes, 15 minutes, & 30 minutes for lights to remain ON after leaving a room.
- Reverse mode allows light to stay OFF in a room where motion is detected.
- Occupancy sensor provides ambient light override preventing lights from switching ON when there is acceptable natural light.
- Provides for a by-pass feature to allow the sensor to perform as a traditional switch.
- Replaces a standard light or fan switch.
- Neutral is required for device installation.
- Mid-Sized decora wallplate included with product.
Product Specifications
| Part Number | VS310R-A |
| Certificate | cUL/UL Listed |
| Color / Finish | Almond |
| Material | Polycarbonate |
| Maximum Voltage | 120V |
| Wattage | 1000W |
| Product Dimensions | 3.31-in X 2.84-in X 5.39-in |
| Weight | 50.50-lb |
| UPC | 032664710537 |
Manufacturer Description
Vac. Switch,DR,SP/3W,1000W,UNV,NLight,AL
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?