Stelpro 8-ft 1200W Convection Floor Insert Heater, Up to 150 Sq.Ft, 4095 BTU/H, 120V, Soft White
Stelpro FI24121SW
SKU STP-FI24121SW
The Stelpro Floor Insert FI Fan Heater is ideal for those with a need for convection electric heat but don't have the proper wall space for installation.
Image may not depict product actual color, inclusions or accessories
The Stelpro Floor Insert FI Fan Heater is ideal for those with a need for convection electric heat but don't have the proper wall space for installation.
Stelpro 1200W Convection Floor Insert Heater, Low Density, 120 V, Silica White features:
- Low density unit - 150 watts per linear foot.
- Single tubular, stainless steel sheathed element with boxed aluminum fins improves heat dissipation.
- Element is securely fastened at its center.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Epoxy-polyester powder coat keeps unit looking new.
- 18-gauge galvanized steel cabinet.
- 9-gauge extruded aluminum grill.
- Thermal protection with manual reset eliminates fire hazard and over heating.
- Protective wire mesh prevents unwanted objects from entering the unit.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Floor recessed.
- Recessed parallel to floor joists.
- Can be installed in concrete floors without any additional framing.
- Air vents on sides may be blocked but may not maximize air output.
Similar Floor Heating Products
Stelpro FI24121SW Description
Stelpro 1200W Convection Floor Insert Heater, Low Density, 120 V, Silica White features:
- Low density unit - 150 watts per linear foot.
- Single tubular, stainless steel sheathed element with boxed aluminum fins improves heat dissipation.
- Element is securely fastened at its center.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Epoxy-polyester powder coat keeps unit looking new.
- 18-gauge galvanized steel cabinet.
- 9-gauge extruded aluminum grill.
- Thermal protection with manual reset eliminates fire hazard and over heating.
- Protective wire mesh prevents unwanted objects from entering the unit.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Floor recessed.
- Recessed parallel to floor joists.
- Can be installed in concrete floors without any additional framing.
- Air vents on sides may be blocked but may not maximize air output.
Similar Floor Heating Products
This page is for your reference only.
Shop for similar Floor Heating
Product Specifications
| Part Number | FI24121SW |
| Color / Finish | Off White |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Maximum Voltage | 120V |
| Room Size | 150 Sq Ft |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 1200W |
| Weight | 59.00-lb |
| UPC | 626296360101 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
The Stelpro Floor Insert FI Fan Heater is ideal for those with a need for convection electric heat but don't have the proper wall space for installation.
This page is for your reference only.
Shop for similar Floor Heating
Similar Floor Heating Products
Stelpro FI24121SW Description
Stelpro 1200W Convection Floor Insert Heater, Low Density, 120 V, Silica White features:
- Low density unit - 150 watts per linear foot.
- Single tubular, stainless steel sheathed element with boxed aluminum fins improves heat dissipation.
- Element is securely fastened at its center.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Epoxy-polyester powder coat keeps unit looking new.
- 18-gauge galvanized steel cabinet.
- 9-gauge extruded aluminum grill.
- Thermal protection with manual reset eliminates fire hazard and over heating.
- Protective wire mesh prevents unwanted objects from entering the unit.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Floor recessed.
- Recessed parallel to floor joists.
- Can be installed in concrete floors without any additional framing.
- Air vents on sides may be blocked but may not maximize air output.
Product Specifications
| Part Number | FI24121SW |
| Color / Finish | Off White |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Maximum Voltage | 120V |
| Room Size | 150 Sq Ft |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 1200W |
| Weight | 59.00-lb |
| UPC | 626296360101 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?