Stelpro 1200W White Patio Door Heater, 240V
Stelpro PDH1252W
SKU STP-PDH1252W
Image may not depict product actual color, inclusions or accessories
- Epoxy-polyester powdercoat keeps unit from corrosion.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noise.
- 4 inch by 4 inch compact profile.
- Solid, 18-gauge steel cabinet and front that may be used as a step.
- Thermal protection with automatic reset prevents fire hazards and over heating.
- Full-length wireway.
- Pencil-proof openings less than 1/4 inch prevents unwanted objects from entering unit.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in thermostat accessible without removing front grill, installed in the left junction box only (optional)
- Low voltage relay kit installed in the left or right junction box
- Surface mounted - wall or floor mounted with or without pedestal kit (optional).
- Wiring compartment at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional)
Similar Baseboard Heater - Up to 150 sq. ft. Products
Stelpro PDH1252W Description
- Epoxy-polyester powdercoat keeps unit from corrosion.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noise.
- 4 inch by 4 inch compact profile.
- Solid, 18-gauge steel cabinet and front that may be used as a step.
- Thermal protection with automatic reset prevents fire hazards and over heating.
- Full-length wireway.
- Pencil-proof openings less than 1/4 inch prevents unwanted objects from entering unit.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in thermostat accessible without removing front grill, installed in the left junction box only (optional)
- Low voltage relay kit installed in the left or right junction box
- Surface mounted - wall or floor mounted with or without pedestal kit (optional).
- Wiring compartment at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional)
Similar Baseboard Heater - Up to 150 sq. ft. Products
$303.28Each
Usually Ships 1-2 Months
Product Specifications
| Part Number | PDH1252W |
| Color / Finish | White |
| Electrical Phase | 1 Ph |
| Heating Technology | Forced Air |
| Maximum Voltage | 240V |
| Room Size | 150 Sq Ft |
| Warranty | 10 Yr |
| Wattage | 1250W |
| Product Dimensions | 4.06-in X 3-in X 4-in |
| Weight | 25.00-lb |
| UPC | 626296001400 |
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
$303.28Each
Usually Ships 1-2 Months
Similar Baseboard Heater - Up to 150 sq. ft. Products
Stelpro PDH1252W Description
- Epoxy-polyester powdercoat keeps unit from corrosion.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noise.
- 4 inch by 4 inch compact profile.
- Solid, 18-gauge steel cabinet and front that may be used as a step.
- Thermal protection with automatic reset prevents fire hazards and over heating.
- Full-length wireway.
- Pencil-proof openings less than 1/4 inch prevents unwanted objects from entering unit.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in thermostat accessible without removing front grill, installed in the left junction box only (optional)
- Low voltage relay kit installed in the left or right junction box
- Surface mounted - wall or floor mounted with or without pedestal kit (optional).
- Wiring compartment at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional)
Product Specifications
| Part Number | PDH1252W |
| Color / Finish | White |
| Electrical Phase | 1 Ph |
| Heating Technology | Forced Air |
| Maximum Voltage | 240V |
| Room Size | 150 Sq Ft |
| Warranty | 10 Yr |
| Wattage | 1250W |
| Product Dimensions | 4.06-in X 3-in X 4-in |
| Weight | 25.00-lb |
| UPC | 626296001400 |
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?