Klein Tools 1.25" Grip Wire Pulling Tool, 2000lb Max. Capacity
Klein Tools 162520-114
SKU KTL-162520114
Klein Tool's Grip Wire Pulling Tool is made from durable steel and is designed for use when a light, compact grip is desired. Shop HomElectrical for a wide variety of reliable and durable tools today!
Image may not depict product actual color, inclusions or accessories
Klein Tool's Grip Wire Pulling Tool is made from durable steel and is designed for use when a light, compact grip is desired. Shop HomElectrical for a wide variety of reliable and durable tools today!
Klein Tools 1.25" Grip Wire Pulling Tool, 2000lb MaximumCapacity features:
- Ideal for light, compact grip work where conductor damage is not a factor.
- Works with 0.75-Inch to 1.25-Inch (19.05 to 31.8 mm) cable diameter range.
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.4 mm) cable area.
- Swing latch helps hold cable in the jaw.
- Made from extremely durable forged and heat treated steel.
- 2000 lb (907 kg) maximum safe load.
- Every grip is inspected by hand and actuated to insure proper function.
- Cable diameter: 0.75" to 1.25" (1.90 to 3.17 cm).
- Jaw type: Aggressive.
- Warnings:
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
Similar Cable & Wire Pulling Products
Klein Tools 162520-114 Description
Klein Tools 1.25" Grip Wire Pulling Tool, 2000lb MaximumCapacity features:
- Ideal for light, compact grip work where conductor damage is not a factor.
- Works with 0.75-Inch to 1.25-Inch (19.05 to 31.8 mm) cable diameter range.
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.4 mm) cable area.
- Swing latch helps hold cable in the jaw.
- Made from extremely durable forged and heat treated steel.
- 2000 lb (907 kg) maximum safe load.
- Every grip is inspected by hand and actuated to insure proper function.
- Cable diameter: 0.75" to 1.25" (1.90 to 3.17 cm).
- Jaw type: Aggressive.
- Warnings:
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
Similar Cable & Wire Pulling Products
Free Shipping
$374.35Each
In Stock-
Ships between Dec. 26 - Dec. 30
Product Specifications
| Part Number | 162520-114 |
| Made in USA | YES |
| Material | Steel |
| Product Dimensions | 6.86-in X 4.05-in X 2.20-in |
| Weight | 3.70-lb |
| UPC | 092644471988 |
Manufacturer Description
Haven's Grip Wire Pulling Tool, 1-1/4-Inch
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Klein Tool's Grip Wire Pulling Tool is made from durable steel and is designed for use when a light, compact grip is desired. Shop HomElectrical for a wide variety of reliable and durable tools today!
Free Shipping
$374.35Each
In Stock-
Ships between Dec. 26 - Dec. 30
Similar Cable & Wire Pulling Products
Klein Tools 162520-114 Description
Klein Tools 1.25" Grip Wire Pulling Tool, 2000lb MaximumCapacity features:
- Ideal for light, compact grip work where conductor damage is not a factor.
- Works with 0.75-Inch to 1.25-Inch (19.05 to 31.8 mm) cable diameter range.
- Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.4 mm) cable area.
- Swing latch helps hold cable in the jaw.
- Made from extremely durable forged and heat treated steel.
- 2000 lb (907 kg) maximum safe load.
- Every grip is inspected by hand and actuated to insure proper function.
- Cable diameter: 0.75" to 1.25" (1.90 to 3.17 cm).
- Jaw type: Aggressive.
- Warnings:
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
Product Specifications
| Part Number | 162520-114 |
| Made in USA | YES |
| Material | Steel |
| Product Dimensions | 6.86-in X 4.05-in X 2.20-in |
| Weight | 3.70-lb |
| UPC | 092644471988 |
Manufacturer Description
Haven's Grip Wire Pulling Tool, 1-1/4-Inch
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?