Stelpro 15000W Washdown Unit Heater w/ Built-In Thermostat, 20 Amps, 51191 BTU/H, 3 Ph, 480V
Stelpro SWU1553-T
SKU STP-SWU1553T
Stelpro's Washdown Unit Heater have a corrosion-resistant, enclosed, and water-tight stainless steel housing make them ideal for damp, hot, or hazardous industrial spaces. Shop HomElectrical for more Stelpro products today!
Image may not depict product actual color, inclusions or accessories
Stelpro's Washdown Unit Heater have a corrosion-resistant, enclosed, and water-tight stainless steel housing make them ideal for damp, hot, or hazardous industrial spaces. Shop HomElectrical for more Stelpro products today!
Stelpro 15000W Washdown Unit Heater w/ Built-in Thermostat, 3 Ph, 480V, 20 Amp features:
- Made to Order | Cannot be Canceled
- Stainless Steel finish, adjustable stainless steel louvers (rotatable 90 degrees).
- Non-metallic control enclosure(meets NEMA 4X hose-down requirements), thermal protection with automatic reset.
- Totally enclosed, epoxy-coated and permanently lubricated ball bearing motor.
- Powder-coated aluminum fan blade.
- Factory mounted control, includes a thermal protection with automatic reset, fan delay relay, controlling contactor transformer for 24V control circuit, terminal block for field wiring and a separate motor contactor(when required).
- Wall or ceiling installation with swivel mounting bracket(included).
- Ceiling mounted with threaded rods (not provided-if the swivel mounting bracket is not required, Choose the SWU-B or SWU-B1 options).
- 6ft. minimum distance from floor mounted, 8inch minimum distance from walls.
- 1/4 HP motor, washable unit.
- 1 year warranty.
Similar Unit Heater Products
Stelpro SWU1553-T Description
Stelpro 15000W Washdown Unit Heater w/ Built-in Thermostat, 3 Ph, 480V, 20 Amp features:
- Made to Order | Cannot be Canceled
- Stainless Steel finish, adjustable stainless steel louvers (rotatable 90 degrees).
- Non-metallic control enclosure(meets NEMA 4X hose-down requirements), thermal protection with automatic reset.
- Totally enclosed, epoxy-coated and permanently lubricated ball bearing motor.
- Powder-coated aluminum fan blade.
- Factory mounted control, includes a thermal protection with automatic reset, fan delay relay, controlling contactor transformer for 24V control circuit, terminal block for field wiring and a separate motor contactor(when required).
- Wall or ceiling installation with swivel mounting bracket(included).
- Ceiling mounted with threaded rods (not provided-if the swivel mounting bracket is not required, Choose the SWU-B or SWU-B1 options).
- 6ft. minimum distance from floor mounted, 8inch minimum distance from walls.
- 1/4 HP motor, washable unit.
- 1 year warranty.
Similar Unit Heater Products
Free Shipping
$3,764.78Each
Usually Ships 2-4 Months
This item is not returnable
Product Specifications
| Part Number | SWU1553-T |
| Certificate | cUL/UL Listed |
| Color / Finish | Stainless Steel |
| Electrical Phase | 3 Ph |
| Heating Technology | Fan-Forced |
| Material | Steel |
| Maximum Amperage | 20 Amp |
| Maximum Voltage | 480V |
| Warranty | 1 Yr |
| Wattage | 15000W |
| Product Dimensions | 20-in X 26-in X 28-in |
| Weight | 130.00-lb |
| UPC | 626296394090 |
Manufacturer Description
WASH DOWN UNIT HEATER B/I STAT 15000W 480V 3PH
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Stelpro's Washdown Unit Heater have a corrosion-resistant, enclosed, and water-tight stainless steel housing make them ideal for damp, hot, or hazardous industrial spaces. Shop HomElectrical for more Stelpro products today!
Free Shipping
$3,764.78Each
Usually Ships 2-4 Months
This item is not returnable
Similar Unit Heater Products
Stelpro SWU1553-T Description
Stelpro 15000W Washdown Unit Heater w/ Built-in Thermostat, 3 Ph, 480V, 20 Amp features:
- Made to Order | Cannot be Canceled
- Stainless Steel finish, adjustable stainless steel louvers (rotatable 90 degrees).
- Non-metallic control enclosure(meets NEMA 4X hose-down requirements), thermal protection with automatic reset.
- Totally enclosed, epoxy-coated and permanently lubricated ball bearing motor.
- Powder-coated aluminum fan blade.
- Factory mounted control, includes a thermal protection with automatic reset, fan delay relay, controlling contactor transformer for 24V control circuit, terminal block for field wiring and a separate motor contactor(when required).
- Wall or ceiling installation with swivel mounting bracket(included).
- Ceiling mounted with threaded rods (not provided-if the swivel mounting bracket is not required, Choose the SWU-B or SWU-B1 options).
- 6ft. minimum distance from floor mounted, 8inch minimum distance from walls.
- 1/4 HP motor, washable unit.
- 1 year warranty.
Product Specifications
| Part Number | SWU1553-T |
| Certificate | cUL/UL Listed |
| Color / Finish | Stainless Steel |
| Electrical Phase | 3 Ph |
| Heating Technology | Fan-Forced |
| Material | Steel |
| Maximum Amperage | 20 Amp |
| Maximum Voltage | 480V |
| Warranty | 1 Yr |
| Wattage | 15000W |
| Product Dimensions | 20-in X 26-in X 28-in |
| Weight | 130.00-lb |
| UPC | 626296394090 |
Manufacturer Description
WASH DOWN UNIT HEATER B/I STAT 15000W 480V 3PH
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?