Stelpro 1750W Electric Baseboard Heater, 220 Sq Ft, 5972 BTU/H, 277V, Off White
Stelpro AB1757SW
SKU STP-AB1757SW
This strong and durable baseboard stands out thanks to its rounded corners and unique, no-end-cap, one-piece design. Shop HomElectrical for more today!
Image may not depict product actual color, inclusions or accessories
This strong and durable baseboard stands out thanks to its rounded corners and unique, no-end-cap, one-piece design. Shop HomElectrical for more today!
- MADE TO ORDER | Cannot be Cancelled
- Strong one-piece cabinet construction, rounded corner.
- Epoxy-polyester powdercoat.
- Suface-mounted installation.
- 22-gauge steel casing able to support 165 lb at its center.
- Full-length thermal protection with automatic reset.
- Cabinet designed to ensure optimal hot air distribution.
- Full-length wireway.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- The element is securely fastened at its center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Built-in single pole or double pole thermostat (sold separately)
- Option to install thermostat in the left or right junction box
- Wall thermostat (not included), the use of an electronic thermostat is strongly recommended
- Smart Controller/Wall thermostat (sold seperately); Smart Wall Thermostat (sold separately).
- Compatible with Z-Wave Electronic Thermostat (sold seperately).
- Non-Programmable Electronic Thermostat or Programmable Electronic Wall Thermostat (Both sold seperately).
- Factory-installed right or left disconnect switch (both sold separately)
- Factory-installed 120V-347V Electronic Relay (sold separately), 600V Electronic Relay(sold separately), 208V-347V Electronic Relay w/ transformer (sold separately)
- Knockouts for the BX and clamps for the NMD cables located at each end.
- Mounting holes spaced at 1-in intervals along the top and bottom of unit.
Stelpro AB1757SW Accessories
Stelpro AB1757SW Accessories
Similar Baseboard Heater - Up to 300 sq. ft. Products
Stelpro AB1757SW Description
- MADE TO ORDER | Cannot be Cancelled
- Strong one-piece cabinet construction, rounded corner.
- Epoxy-polyester powdercoat.
- Suface-mounted installation.
- 22-gauge steel casing able to support 165 lb at its center.
- Full-length thermal protection with automatic reset.
- Cabinet designed to ensure optimal hot air distribution.
- Full-length wireway.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- The element is securely fastened at its center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Built-in single pole or double pole thermostat (sold separately)
- Option to install thermostat in the left or right junction box
- Wall thermostat (not included), the use of an electronic thermostat is strongly recommended
- Smart Controller/Wall thermostat (sold seperately); Smart Wall Thermostat (sold separately).
- Compatible with Z-Wave Electronic Thermostat (sold seperately).
- Non-Programmable Electronic Thermostat or Programmable Electronic Wall Thermostat (Both sold seperately).
- Factory-installed right or left disconnect switch (both sold separately)
- Factory-installed 120V-347V Electronic Relay (sold separately), 600V Electronic Relay(sold separately), 208V-347V Electronic Relay w/ transformer (sold separately)
- Knockouts for the BX and clamps for the NMD cables located at each end.
- Mounting holes spaced at 1-in intervals along the top and bottom of unit.
Stelpro AB1757SW Accessories
Similar Baseboard Heater - Up to 300 sq. ft. Products
Stelpro AB1757SW Parts
Color / Finish
Off White
sku STP-AB1757SW
$131.34Each
Usually Ships 1-2 Months
Product Specifications
| Part Number | AB1757SW |
| Certificate | CSA US |
| Color / Finish | Off White |
| Material | Steel |
| Maximum Voltage | 277V |
| Warranty | 3 Yr |
| Wattage | 1750W |
| Product Dimensions | 5.87-in X 76-in X 2.56-in |
| Weight | 18.00-lb |
| UPC | 626296615836 |
Manufacturer Description
BASEBOARD SOFT WHITE 1750W 277V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This strong and durable baseboard stands out thanks to its rounded corners and unique, no-end-cap, one-piece design. Shop HomElectrical for more today!
Color / Finish
Off White
sku STP-AB1757SW
$131.34Each
Usually Ships 1-2 Months
Stelpro AB1757SW Accessories
Similar Baseboard Heater - Up to 300 sq. ft. Products
Stelpro AB1757SW Description
- MADE TO ORDER | Cannot be Cancelled
- Strong one-piece cabinet construction, rounded corner.
- Epoxy-polyester powdercoat.
- Suface-mounted installation.
- 22-gauge steel casing able to support 165 lb at its center.
- Full-length thermal protection with automatic reset.
- Cabinet designed to ensure optimal hot air distribution.
- Full-length wireway.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- The element is securely fastened at its center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Built-in single pole or double pole thermostat (sold separately)
- Option to install thermostat in the left or right junction box
- Wall thermostat (not included), the use of an electronic thermostat is strongly recommended
- Smart Controller/Wall thermostat (sold seperately); Smart Wall Thermostat (sold separately).
- Compatible with Z-Wave Electronic Thermostat (sold seperately).
- Non-Programmable Electronic Thermostat or Programmable Electronic Wall Thermostat (Both sold seperately).
- Factory-installed right or left disconnect switch (both sold separately)
- Factory-installed 120V-347V Electronic Relay (sold separately), 600V Electronic Relay(sold separately), 208V-347V Electronic Relay w/ transformer (sold separately)
- Knockouts for the BX and clamps for the NMD cables located at each end.
- Mounting holes spaced at 1-in intervals along the top and bottom of unit.
Stelpro AB1757SW Parts
Product Specifications
| Part Number | AB1757SW |
| Certificate | CSA US |
| Color / Finish | Off White |
| Material | Steel |
| Maximum Voltage | 277V |
| Warranty | 3 Yr |
| Wattage | 1750W |
| Product Dimensions | 5.87-in X 76-in X 2.56-in |
| Weight | 18.00-lb |
| UPC | 626296615836 |
Manufacturer Description
BASEBOARD SOFT WHITE 1750W 277V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?