Stelpro 1750W SCA Architectural Baseboard Heater 240 V, 250 W Per Linear Foot
Stelpro SCA21172W
SKU STP-SCA21172W
Image may not depict product actual color, inclusions or accessories
STELPRO 1750W SCA Architectural Baseboard Heater 240 V, 250 W Per Linear Foot
- Epoxy-polyester powdercoat.
- 18-gauge steel cabinet and 16-gauge steel front panel.
- Front air intake and top air discharge.
- Thermal protection with automatic reset.
- Full-length wireway.
- Pencil-proof openings of less than 1/4-in prevent foreign objects from entering the unit.
- Single tubular, stainless steel element with boxed aluminum fins for improved heat dissipation; the element is securely fastened at it's center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in tamper proof thermostat accessible without removing front grille, installed in the left junction box only (optional) (sold separately)
- Low voltage relay kit installed in the left or right junction box (optional).
- Surface Mounted.
- Wall or floor mounted with or without pedestal kit (optional) (sold separately).
- Wiring compartments at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous look (optional) (sold seperately)
- Disconnect Switch
- 120V-250V
- 277V-600V
- 3 Year Warranty.
- CSA US.
Similar Baseboard Heater - Up to 200 sq. ft. Products
Stelpro SCA21172W Description
STELPRO 1750W SCA Architectural Baseboard Heater 240 V, 250 W Per Linear Foot
- Epoxy-polyester powdercoat.
- 18-gauge steel cabinet and 16-gauge steel front panel.
- Front air intake and top air discharge.
- Thermal protection with automatic reset.
- Full-length wireway.
- Pencil-proof openings of less than 1/4-in prevent foreign objects from entering the unit.
- Single tubular, stainless steel element with boxed aluminum fins for improved heat dissipation; the element is securely fastened at it's center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in tamper proof thermostat accessible without removing front grille, installed in the left junction box only (optional) (sold separately)
- Low voltage relay kit installed in the left or right junction box (optional).
- Surface Mounted.
- Wall or floor mounted with or without pedestal kit (optional) (sold separately).
- Wiring compartments at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous look (optional) (sold seperately)
- Disconnect Switch
- 120V-250V
- 277V-600V
- 3 Year Warranty.
- CSA US.
Similar Baseboard Heater - Up to 200 sq. ft. Products
$650.15Each
Usually Ships 1-2 Months
Product Specifications
| Part Number | SCA21172W |
| Color / Finish | White |
| Heating Technology | Convection |
| Maximum Voltage | 240V |
| Room Size | 151 - 350 |
| Warranty | 10 Yr |
| Wattage | 1750W |
| Product Dimensions | 82.70-in X 3-in X 4-in |
| Weight | 29.00-lb |
| UPC | 626296028018 |
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
$650.15Each
Usually Ships 1-2 Months
Similar Baseboard Heater - Up to 200 sq. ft. Products
Stelpro SCA21172W Description
STELPRO 1750W SCA Architectural Baseboard Heater 240 V, 250 W Per Linear Foot
- Epoxy-polyester powdercoat.
- 18-gauge steel cabinet and 16-gauge steel front panel.
- Front air intake and top air discharge.
- Thermal protection with automatic reset.
- Full-length wireway.
- Pencil-proof openings of less than 1/4-in prevent foreign objects from entering the unit.
- Single tubular, stainless steel element with boxed aluminum fins for improved heat dissipation; the element is securely fastened at it's center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in tamper proof thermostat accessible without removing front grille, installed in the left junction box only (optional) (sold separately)
- Low voltage relay kit installed in the left or right junction box (optional).
- Surface Mounted.
- Wall or floor mounted with or without pedestal kit (optional) (sold separately).
- Wiring compartments at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous look (optional) (sold seperately)
- Disconnect Switch
- 120V-250V
- 277V-600V
- 3 Year Warranty.
- CSA US.
Product Specifications
| Part Number | SCA21172W |
| Color / Finish | White |
| Heating Technology | Convection |
| Maximum Voltage | 240V |
| Room Size | 151 - 350 |
| Warranty | 10 Yr |
| Wattage | 1750W |
| Product Dimensions | 82.70-in X 3-in X 4-in |
| Weight | 29.00-lb |
| UPC | 626296028018 |
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?