Stelpro 1800W Architectural Baseboard, Medium Density, 208 V, Silica White
Stelpro SCA27188SW
SKU STP-SCA27188SW
The Stelpro Architectural Baseboard heater is ideal for shopping malls, offices, schools, hospitals, and retail centers due to its many installation possibilities.
Image may not depict product actual color, inclusions or accessories
The Stelpro Architectural Baseboard heater is ideal for shopping malls, offices, schools, hospitals, and retail centers due to its many installation possibilities.
Stelpro 1800W Architectural Baseboard, Medium Density, 208 V, Silica White features:
- Medium density unit - 200 watts per linear foot.
- 18-gauge steel cabinet and 16-gauge steel front panel.
- Front air intake and top air discharge.
- Thermal protection with automatic reset prevents overheating and fire hazard.
- Full-length wireway.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- The element is securely fastened at its center.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in tamper-proof thermostat accessible without removing front grill, installed in the left junction box only (optional).
- Low voltage relay kit installed in the left or right junction box (optional).
- Surface mounted.
- Wall or floor mounted with or without pedestal kit (optional).
- Wiring compartments at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional).
Similar Baseboard Heater - Up to 200 sq. ft. Products
Stelpro SCA27188SW Description
Stelpro 1800W Architectural Baseboard, Medium Density, 208 V, Silica White features:
- Medium density unit - 200 watts per linear foot.
- 18-gauge steel cabinet and 16-gauge steel front panel.
- Front air intake and top air discharge.
- Thermal protection with automatic reset prevents overheating and fire hazard.
- Full-length wireway.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- The element is securely fastened at its center.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in tamper-proof thermostat accessible without removing front grill, installed in the left junction box only (optional).
- Low voltage relay kit installed in the left or right junction box (optional).
- Surface mounted.
- Wall or floor mounted with or without pedestal kit (optional).
- Wiring compartments at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional).
Similar Baseboard Heater - Up to 200 sq. ft. Products
This page is for your reference only.
Shop for similar Baseboard Heater - Up to 200 sq. ft.
Product Specifications
| Part Number | SCA27188SW |
| Color / Finish | Off White |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Maximum Voltage | 208V |
| Room Size | 350 Sq Ft |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 1800W |
| Product Dimensions | 106.30-in X 3-in X 6.06-in |
| Weight | 37.00-lb |
| UPC | 626296362716 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
The Stelpro Architectural Baseboard heater is ideal for shopping malls, offices, schools, hospitals, and retail centers due to its many installation possibilities.
This page is for your reference only.
Shop for similar Baseboard Heater - Up to 200 sq. ft.
Similar Baseboard Heater - Up to 200 sq. ft. Products
Stelpro SCA27188SW Description
Stelpro 1800W Architectural Baseboard, Medium Density, 208 V, Silica White features:
- Medium density unit - 200 watts per linear foot.
- 18-gauge steel cabinet and 16-gauge steel front panel.
- Front air intake and top air discharge.
- Thermal protection with automatic reset prevents overheating and fire hazard.
- Full-length wireway.
- Single tubular, stainless steel sheathed element with boxed aluminum fins for improved heat dissipation.
- The element is securely fastened at its center.
- Floating in nylon sleeves at each end, eliminating expansion and contraction noises.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
- Built-in tamper-proof thermostat accessible without removing front grill, installed in the left junction box only (optional).
- Low voltage relay kit installed in the left or right junction box (optional).
- Surface mounted.
- Wall or floor mounted with or without pedestal kit (optional).
- Wiring compartments at both ends of unit.
- Blank sections (custom lengths) and accessories are available for a continuous effect (optional).
Product Specifications
| Part Number | SCA27188SW |
| Color / Finish | Off White |
| Electrical Phase | 1 Ph |
| Heating Technology | Convection |
| Maximum Voltage | 208V |
| Room Size | 350 Sq Ft |
| Sealed Battery | No |
| Warranty | 3 Yrs |
| Wattage | 1800W |
| Product Dimensions | 106.30-in X 3-in X 6.06-in |
| Weight | 37.00-lb |
| UPC | 626296362716 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?