Stelpro 1800W Architectural Cabinet Heater w/ Front Outlet, 208V, 6143 BTU/H, White
Stelpro ACW75012188WFF
SKU STP-ACW75012188WFF
Stelpro's Architectural Cabinet Heaters are offered in three heat densities: 450W, 600W, and 750W per linear foot. These cabinet heaters are intended for commercial environments. Shop HomElectrical for more Stelpro products today!
Image may not depict product actual color, inclusions or accessories
Stelpro's Architectural Cabinet Heaters are offered in three heat densities: 450W, 600W, and 750W per linear foot. These cabinet heaters are intended for commercial environments. Shop HomElectrical for more Stelpro products today!
Stelpro 1800W Architectural Cabinet Heater w/ Front Outlet, 208V, 6143 BTU/H, White features:
- Epoxy-polyester and steel material, White color finish.
- 208V, 1800W, 6143 BTU/H.
- 18-gauge steel cabinet, 16-gauge steel front panel with extruded aluminum grilles.
- Thermal protection with auto reset, full length wireway.
- Nylon sleeves support both ends, elimination noises from expansion and contraction.
- Wall and built-in thermostat installable in left or right junction (sold separately), low voltage relay kit(sold separately)
- Surface mount installation.
- Can be wall recessed using four-piece trim frame(sold separately)
- Wall or floor mounted with or without pedestal kit(sold separately)
- Wiring compartments on both ends.
- CSA US rated.
- Unit intended for commercial use only, models higher than 450W/Ft density can become VERY HOT
- 3 year warranty.
Similar Cabinet Heater Products
Stelpro ACW75012188WFF Description
Stelpro 1800W Architectural Cabinet Heater w/ Front Outlet, 208V, 6143 BTU/H, White features:
- Epoxy-polyester and steel material, White color finish.
- 208V, 1800W, 6143 BTU/H.
- 18-gauge steel cabinet, 16-gauge steel front panel with extruded aluminum grilles.
- Thermal protection with auto reset, full length wireway.
- Nylon sleeves support both ends, elimination noises from expansion and contraction.
- Wall and built-in thermostat installable in left or right junction (sold separately), low voltage relay kit(sold separately)
- Surface mount installation.
- Can be wall recessed using four-piece trim frame(sold separately)
- Wall or floor mounted with or without pedestal kit(sold separately)
- Wiring compartments on both ends.
- CSA US rated.
- Unit intended for commercial use only, models higher than 450W/Ft density can become VERY HOT
- 3 year warranty.
Similar Cabinet Heater Products
Maximum Voltage
208V
sku STP-ACW75012188WFF
Free Shipping
$908.06Each
Usually Ships 1-2 Months
Product Specifications
| Part Number | ACW75012188WFF |
| Certificate | CSA US |
| Color / Finish | White |
| Material | Steel |
| Maximum Voltage | 208V |
| Power | 6143 BTU/H |
| Warranty | 3 Yr |
| Wattage | 1800W |
| Product Dimensions | 47.25-in X 5.25-in X 14-in |
| Weight | 53.00-lb |
| UPC | 626296523421 |
Manufacturer Description
ARCH. CAB. WHTE FRONT/IN&OUT 1800W 208V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Stelpro's Architectural Cabinet Heaters are offered in three heat densities: 450W, 600W, and 750W per linear foot. These cabinet heaters are intended for commercial environments. Shop HomElectrical for more Stelpro products today!
Maximum Voltage
208V
sku STP-ACW75012188WFF
Free Shipping
$908.06Each
Usually Ships 1-2 Months
Similar Cabinet Heater Products
Stelpro ACW75012188WFF Description
Stelpro 1800W Architectural Cabinet Heater w/ Front Outlet, 208V, 6143 BTU/H, White features:
- Epoxy-polyester and steel material, White color finish.
- 208V, 1800W, 6143 BTU/H.
- 18-gauge steel cabinet, 16-gauge steel front panel with extruded aluminum grilles.
- Thermal protection with auto reset, full length wireway.
- Nylon sleeves support both ends, elimination noises from expansion and contraction.
- Wall and built-in thermostat installable in left or right junction (sold separately), low voltage relay kit(sold separately)
- Surface mount installation.
- Can be wall recessed using four-piece trim frame(sold separately)
- Wall or floor mounted with or without pedestal kit(sold separately)
- Wiring compartments on both ends.
- CSA US rated.
- Unit intended for commercial use only, models higher than 450W/Ft density can become VERY HOT
- 3 year warranty.
Product Specifications
| Part Number | ACW75012188WFF |
| Certificate | CSA US |
| Color / Finish | White |
| Material | Steel |
| Maximum Voltage | 208V |
| Power | 6143 BTU/H |
| Warranty | 3 Yr |
| Wattage | 1800W |
| Product Dimensions | 47.25-in X 5.25-in X 14-in |
| Weight | 53.00-lb |
| UPC | 626296523421 |
Manufacturer Description
ARCH. CAB. WHTE FRONT/IN&OUT 1800W 208V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?