Stelpro 1800W Sloped Architectural Cabinet Heater, 450W/Ft, 208V, White
Stelpro ACWS75012188W
SKU STP-ACWS75012188W
Stelpro's Sloped Architectural Cabinet Heaters are offered in three heat densities: 450W, 600W, 750W per linear foot. Its sloped design prevents hazardous behaviors, such as sitting on the heater. Shop HomElectrical for more products today!
Image may not depict product actual color, inclusions or accessories
Stelpro's Sloped Architectural Cabinet Heaters are offered in three heat densities: 450W, 600W, 750W per linear foot. Its sloped design prevents hazardous behaviors, such as sitting on the heater. Shop HomElectrical for more products today!
Stelpro 1800W Sloped Architectural Cabinet Heater, 450W/Ft, 208V, White features:
- Epoxy-polyester and Steel material, White color finish.
- 208V, 1800W, 6143 BTU/H.
- Sloped design, decreases likelihood of being sat on or used as shelving.
- 18-gauge steel cabinet, 16-gauge steel front panel with extruded aluminum grilles.
- Thermal protection with auto reset, full length wireway.
- Has front air intake with top air discharge capability.
- Aluminum grille.
- Nylon sleeves support both ends, elimination noises from expansion and contraction.
- Wiring compartment at both ends.
- Wall or built-in thermostat installable in left or right junction (sold separately), low voltage relay kit(sold separately)
- Surface mount installation.
- Can be wall recessed using four-piece trim frame(sold separately)
- Wall or floor mounted with or without pedestal kit(sold separately)
- 3 year warranty.
- CSA US rated.
- Unit intended for commercial use only, models higher than 450W/Ft can become VERY HOT
- Ideal for heating lobbies, corridor, hospitals, and shopping malls.
Similar Cabinet Heater Products
Stelpro ACWS75012188W Description
Stelpro 1800W Sloped Architectural Cabinet Heater, 450W/Ft, 208V, White features:
- Epoxy-polyester and Steel material, White color finish.
- 208V, 1800W, 6143 BTU/H.
- Sloped design, decreases likelihood of being sat on or used as shelving.
- 18-gauge steel cabinet, 16-gauge steel front panel with extruded aluminum grilles.
- Thermal protection with auto reset, full length wireway.
- Has front air intake with top air discharge capability.
- Aluminum grille.
- Nylon sleeves support both ends, elimination noises from expansion and contraction.
- Wiring compartment at both ends.
- Wall or built-in thermostat installable in left or right junction (sold separately), low voltage relay kit(sold separately)
- Surface mount installation.
- Can be wall recessed using four-piece trim frame(sold separately)
- Wall or floor mounted with or without pedestal kit(sold separately)
- 3 year warranty.
- CSA US rated.
- Unit intended for commercial use only, models higher than 450W/Ft can become VERY HOT
- Ideal for heating lobbies, corridor, hospitals, and shopping malls.
Similar Cabinet Heater Products
Maximum Voltage
208V
sku STP-ACWS75012188W
Free Shipping
$908.06Each
Usually Ships 1-2 Months
Product Specifications
| Part Number | ACWS75012188W |
| Certificate | CSA US |
| Color / Finish | White |
| Material | Steel |
| Maximum Voltage | 208V |
| Power | 6143 BTU/H |
| Warranty | 3 Yr |
| Wattage | 1800W |
| Product Dimensions | 47.25-in X 5.25-in X 14-in |
| Weight | 53.00-lb |
| UPC | 626296526606 |
Manufacturer Description
SLOPED ARCH.CABINET WHITE 1800W 208V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Stelpro's Sloped Architectural Cabinet Heaters are offered in three heat densities: 450W, 600W, 750W per linear foot. Its sloped design prevents hazardous behaviors, such as sitting on the heater. Shop HomElectrical for more products today!
Maximum Voltage
208V
sku STP-ACWS75012188W
Free Shipping
$908.06Each
Usually Ships 1-2 Months
Similar Cabinet Heater Products
Stelpro ACWS75012188W Description
Stelpro 1800W Sloped Architectural Cabinet Heater, 450W/Ft, 208V, White features:
- Epoxy-polyester and Steel material, White color finish.
- 208V, 1800W, 6143 BTU/H.
- Sloped design, decreases likelihood of being sat on or used as shelving.
- 18-gauge steel cabinet, 16-gauge steel front panel with extruded aluminum grilles.
- Thermal protection with auto reset, full length wireway.
- Has front air intake with top air discharge capability.
- Aluminum grille.
- Nylon sleeves support both ends, elimination noises from expansion and contraction.
- Wiring compartment at both ends.
- Wall or built-in thermostat installable in left or right junction (sold separately), low voltage relay kit(sold separately)
- Surface mount installation.
- Can be wall recessed using four-piece trim frame(sold separately)
- Wall or floor mounted with or without pedestal kit(sold separately)
- 3 year warranty.
- CSA US rated.
- Unit intended for commercial use only, models higher than 450W/Ft can become VERY HOT
- Ideal for heating lobbies, corridor, hospitals, and shopping malls.
Product Specifications
| Part Number | ACWS75012188W |
| Certificate | CSA US |
| Color / Finish | White |
| Material | Steel |
| Maximum Voltage | 208V |
| Power | 6143 BTU/H |
| Warranty | 3 Yr |
| Wattage | 1800W |
| Product Dimensions | 47.25-in X 5.25-in X 14-in |
| Weight | 53.00-lb |
| UPC | 626296526606 |
Manufacturer Description
SLOPED ARCH.CABINET WHITE 1800W 208V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?