Stelpro 2000W ADR-R Ceiling Fan Heater w/ Built-in Thermostat, 6825 BTU/H, 277V, Off White
Stelpro ADRR0271CTSW
SKU STP-ADRR0271CTSW
This ceiling heater is well suited for building entryways, stairwells, warehouses, garages, workshops and hallways. Shop for more ceiling heaters at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
This ceiling heater is well suited for building entryways, stairwells, warehouses, garages, workshops and hallways. Shop for more ceiling heaters at HomElectrical today!
- Fast temperature rise via heat recovery.
- Ideal for building entryway, warehouse, stairwell, garage or workshop.
- Epoxy-polyester powder coat.
- 20-gauge steel cabinet and 14-gauge steel grille.
- Quiet helicoidal fan.
- Thermal protection with automatic reset.
- Totally enclosed, permanently lubricated motor.
- Nichrome element produces instant heat.
- Disconnect switch option available.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended (up to 4000W).
- Stelpro Wall Thermostat sold separately
- Fan-only mode for continuous air circulation, controlled by built-in selection switch.
- Heating mode, confirmed by pilot light when heating is on.
- Connection of multiple units to the same thermostat is possible with a relay kit without a transformer (optional) and an external transformer (not provided).
- Relay Kit sold separately
- Ceiling surface mounted with bracket to support unit during wiring (included).
- Ceiling recessed in a T-bar.
- CSA US.
Similar Ceiling Heater - Up To 300 Sq. Ft. Products
Stelpro ADRR0271CTSW Description
- Fast temperature rise via heat recovery.
- Ideal for building entryway, warehouse, stairwell, garage or workshop.
- Epoxy-polyester powder coat.
- 20-gauge steel cabinet and 14-gauge steel grille.
- Quiet helicoidal fan.
- Thermal protection with automatic reset.
- Totally enclosed, permanently lubricated motor.
- Nichrome element produces instant heat.
- Disconnect switch option available.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended (up to 4000W).
- Stelpro Wall Thermostat sold separately
- Fan-only mode for continuous air circulation, controlled by built-in selection switch.
- Heating mode, confirmed by pilot light when heating is on.
- Connection of multiple units to the same thermostat is possible with a relay kit without a transformer (optional) and an external transformer (not provided).
- Relay Kit sold separately
- Ceiling surface mounted with bracket to support unit during wiring (included).
- Ceiling recessed in a T-bar.
- CSA US.
Similar Ceiling Heater - Up To 300 Sq. Ft. Products
Color / Finish
Off White
sku STP-ADRR0271CTSW
Free Shipping
$1,195.31Each
Usually Ships 1-2 Months
Product Specifications
| Part Number | ADRR0271CTSW |
| Air Flow (CFM) | 250 |
| Certificate | CSA US |
| Color / Finish | Off White |
| Material | Steel |
| Maximum Voltage | 277V |
| Power | 6,825 BTU/H |
| Warranty | 3 Yr |
| Wattage | 2000W |
| Product Dimensions | 23.62-in X 23.62-in X 4.93-in |
| Weight | 30.00-lb |
| UPC | 626296331514 |
Manufacturer Description
CEIL.ADR-R SOFT WHITE B/I STAT 2000W 277V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This ceiling heater is well suited for building entryways, stairwells, warehouses, garages, workshops and hallways. Shop for more ceiling heaters at HomElectrical today!
Color / Finish
Off White
sku STP-ADRR0271CTSW
Free Shipping
$1,195.31Each
Usually Ships 1-2 Months
Similar Ceiling Heater - Up To 300 Sq. Ft. Products
Stelpro ADRR0271CTSW Description
- Fast temperature rise via heat recovery.
- Ideal for building entryway, warehouse, stairwell, garage or workshop.
- Epoxy-polyester powder coat.
- 20-gauge steel cabinet and 14-gauge steel grille.
- Quiet helicoidal fan.
- Thermal protection with automatic reset.
- Totally enclosed, permanently lubricated motor.
- Nichrome element produces instant heat.
- Disconnect switch option available.
- Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended (up to 4000W).
- Stelpro Wall Thermostat sold separately
- Fan-only mode for continuous air circulation, controlled by built-in selection switch.
- Heating mode, confirmed by pilot light when heating is on.
- Connection of multiple units to the same thermostat is possible with a relay kit without a transformer (optional) and an external transformer (not provided).
- Relay Kit sold separately
- Ceiling surface mounted with bracket to support unit during wiring (included).
- Ceiling recessed in a T-bar.
- CSA US.
Product Specifications
| Part Number | ADRR0271CTSW |
| Air Flow (CFM) | 250 |
| Certificate | CSA US |
| Color / Finish | Off White |
| Material | Steel |
| Maximum Voltage | 277V |
| Power | 6,825 BTU/H |
| Warranty | 3 Yr |
| Wattage | 2000W |
| Product Dimensions | 23.62-in X 23.62-in X 4.93-in |
| Weight | 30.00-lb |
| UPC | 626296331514 |
Manufacturer Description
CEIL.ADR-R SOFT WHITE B/I STAT 2000W 277V
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?