Eaton Wiring 2200W Occupancy Sensor & Dimmer w/LED, Grey
Eaton Wiring OS10D7-GY
SKU ETW-OS10D7GY
Eaton Wiring's 2200W Occupancy Sensor & Dimmer w/LED, featuring a grey color finish, is a full-range preset dimming control that is provided with a horizontaldim/bright bar. Shop our full selection of Eaton Wiring's products at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
Eaton Wiring's 2200W Occupancy Sensor & Dimmer w/LED, featuring a grey color finish, is a full-range preset dimming control that is provided with a horizontaldim/bright bar. Shop our full selection of Eaton Wiring's products at HomElectrical today!
Eaton Wiring 2200W Occupancy Sensor & Dimmer w/LED, Grey features:
- Single pole & 3-Way.
- 10A @ 120V/AC, 8A @ 277V/AC.
- Wattage: 1200W; 120V, 2200W; 277V.
- Compatible with dimmable 0-10V LED and FLR ballasts.
- Full-range Preset dimming control provided with horizontal dim/bright bar.
- Digital circuitry provides aesthetically pleasing soft ON/fade OFF.
- Single green LED indicates motion.
- Push pad design provides minimal travel and crisp actuation.
- Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
- Selectable time delay of 15 seconds (Test mode, changes to 2 minutes after 2 minutes of powering up), 5 minutes (factory default), 15 minutes and 20 minutes.
- Adjustable high-end and low-end trim setting.
- Occupancy Sensor provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
- Occupancy Sensor version allows to toggle between Auto ON/ Auto OFF or Manual ON/Auto OFF mode with a simple press and hold of switch.
- Vacancy Sensor meets California Title 20.
- No leakage to load in OFF mode.
- Uniform color matched PIR lens to device housing.
- Neutral required for installation of device.
- Color Finish: Grey.
Similar Dimmer Switches Products
Eaton Wiring OS10D7-GY Description
Eaton Wiring 2200W Occupancy Sensor & Dimmer w/LED, Grey features:
- Single pole & 3-Way.
- 10A @ 120V/AC, 8A @ 277V/AC.
- Wattage: 1200W; 120V, 2200W; 277V.
- Compatible with dimmable 0-10V LED and FLR ballasts.
- Full-range Preset dimming control provided with horizontal dim/bright bar.
- Digital circuitry provides aesthetically pleasing soft ON/fade OFF.
- Single green LED indicates motion.
- Push pad design provides minimal travel and crisp actuation.
- Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
- Selectable time delay of 15 seconds (Test mode, changes to 2 minutes after 2 minutes of powering up), 5 minutes (factory default), 15 minutes and 20 minutes.
- Adjustable high-end and low-end trim setting.
- Occupancy Sensor provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
- Occupancy Sensor version allows to toggle between Auto ON/ Auto OFF or Manual ON/Auto OFF mode with a simple press and hold of switch.
- Vacancy Sensor meets California Title 20.
- No leakage to load in OFF mode.
- Uniform color matched PIR lens to device housing.
- Neutral required for installation of device.
- Color Finish: Grey.
Similar Dimmer Switches Products
Color / Finish
Gray
sku ETW-OS10D7GY
Free Shipping Eligible
$63.76Each
Usually Ships 8-14 Business Days
Product Specifications
| Part Number | OS10D7-GY |
| Certificate | cUL/UL Listed |
| Color / Finish | Gray |
| Maximum Amperage | 10 Amp |
| Maximum Voltage | 277V |
| Wattage | 2200W |
| Product Dimensions | 4.25-in X 2.75-in X 1.96-in |
| Weight | 0.50-lb |
| UPC | 032664748493 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Eaton Wiring's 2200W Occupancy Sensor & Dimmer w/LED, featuring a grey color finish, is a full-range preset dimming control that is provided with a horizontaldim/bright bar. Shop our full selection of Eaton Wiring's products at HomElectrical today!
Color / Finish
Gray
sku ETW-OS10D7GY
Free Shipping Eligible
$63.76Each
Usually Ships 8-14 Business Days
Similar Dimmer Switches Products
Eaton Wiring OS10D7-GY Description
Eaton Wiring 2200W Occupancy Sensor & Dimmer w/LED, Grey features:
- Single pole & 3-Way.
- 10A @ 120V/AC, 8A @ 277V/AC.
- Wattage: 1200W; 120V, 2200W; 277V.
- Compatible with dimmable 0-10V LED and FLR ballasts.
- Full-range Preset dimming control provided with horizontal dim/bright bar.
- Digital circuitry provides aesthetically pleasing soft ON/fade OFF.
- Single green LED indicates motion.
- Push pad design provides minimal travel and crisp actuation.
- Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
- Selectable time delay of 15 seconds (Test mode, changes to 2 minutes after 2 minutes of powering up), 5 minutes (factory default), 15 minutes and 20 minutes.
- Adjustable high-end and low-end trim setting.
- Occupancy Sensor provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
- Occupancy Sensor version allows to toggle between Auto ON/ Auto OFF or Manual ON/Auto OFF mode with a simple press and hold of switch.
- Vacancy Sensor meets California Title 20.
- No leakage to load in OFF mode.
- Uniform color matched PIR lens to device housing.
- Neutral required for installation of device.
- Color Finish: Grey.
Product Specifications
| Part Number | OS10D7-GY |
| Certificate | cUL/UL Listed |
| Color / Finish | Gray |
| Maximum Amperage | 10 Amp |
| Maximum Voltage | 277V |
| Wattage | 2200W |
| Product Dimensions | 4.25-in X 2.75-in X 1.96-in |
| Weight | 0.50-lb |
| UPC | 032664748493 |
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?