Eaton Wiring 2200W Occupancy Sensor & Dimmer w/LED, Light Almond

Eaton Wiring 2200W Occupancy Sensor & Dimmer w/LED, Light Almond features:

• Single pole & 3-Way.
• 10A @ 120V/AC, 8A @ 277V/AC.
• Wattage: 1200W; 120V, 2200W; 277V.
• Compatible with dimmable 0-10V LED and FLR ballasts.
• Full-range Preset dimming control provided with horizontal dim/bright bar.
• Digital circuitry provides aesthetically pleasing soft ON/fade OFF.
• Single green LED indicates motion.
• Push pad design provides minimal travel and crisp actuation.
• Provides 180 degree field of view and 1000 sq. ft. of major motion coverage.
• Selectable time delay of 15 seconds (Test mode, changes to 2 minutes after 2 minutes of powering up), 5 minutes (factory default), 15 minutes and 20 minutes.
• Adjustable high-end and low-end trim setting.
• Occupancy Sensor provides a selectable ambient light override preventing lights from switching ON when there is acceptable natural light.
• Occupancy Sensor version allows to toggle between Auto ON/ Auto OFF or Manual ON/Auto OFF mode with a simple press and hold of switch.
• Vacancy Sensor meets California Title 20.
• No leakage to load in OFF mode.
• Uniform color matched PIR lens to device housing.
• Neutral required for installation of device.
• Color Finish: Light Almond.