Stelpro 9-ft 2500W Sloped Architectural Baseboard Heater, 300 Sq.Ft, 8532 BTU/H, 240V, White

STELPRO 277 V SCAS Sloped Architectural Baseboard 2500W

• Epoxy-polyester powdercoat.
• 18-gauge steel cabinet and 16-gauge steel front panel.
• Front air intake and top air discharge.
• Thermal protection with automatic reset.
• Full-length wireway.
• Pencil-proof openings of less than 1/4-in prevent foreign objects from entering the unit.
• Single tubular, stainless steel element with boxed aluminum fins for improved heat dissipation; the element is securely fastened at it's center, floating in nylon sleeves at each end, eliminating expansion and contraction noises.
• Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
• Built-in tamper proof thermostat accessible without removing front grille, installed in the left junction box only (optional) (sold separately)
  • Single Pole.
  • Double Pole.
• Low voltage relay kit installed in the left or right junction box (optional) (sold separately).
• Surface Mounted.
• Wall or floor mounted with or without pedestal kit (optional) (sold separately).
• Wiring compartments at both ends of unit.
• Black sections (custom lengths) and accessories are available for a continuous look (optional) (sold separately)
  • Joiner Strip.
  • Inside Corner.
  • Outside Corner.
  • Clean Back.
• Disconnect Switch
  • Right Side.
  • Left Side.
• 3 Year Warranty.
• CSA US.
• Dimensions: 106.3"(L) x 7"(H) x 3"(W).