MrCool 70000 BTU/H Gas Furnace w/ 17.5-in Cabinet, Upflow, 80% AFUE, 1245 CFM, 120V
MrCool MGM80SE070B3A
SKU MCL-MGM80SE070B3A
This gas furnace from MRCOOL with an upflow or horizontal configuration heats your home with a CFM up to 1245, delivering comfort at an 80% energy efficiency rating. Shop more HVAC solutions at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
This gas furnace from MRCOOL with an upflow or horizontal configuration heats your home with a CFM up to 1245, delivering comfort at an 80% energy efficiency rating. Shop more HVAC solutions at HomElectrical today!
- 1245 CFM.
- 17.5 inch cabinet size.
- Covers about 1900 square foot.
- ECM motor.
- Single stage gas valve.
- Upflow/horizontal.
- Input BTU/H: 66,000; output BTU/H: 52,800.
- 1.5-3 ton cooling capacity.
- 1/2 inch gas inlet.
- 120 volts, 60 Hz, 1 phase.
- 15 amps.
- 10 x 10 blower size.
- Temperature rise range: 40 to 70 degrees F.
- 5 speed motor.
- Gas type: NG (LP with optional kit).
- 1/2 HP.
- AHRI Certified.
- 10 year warranty when registered
- Left or right utility connections.
- Aluminum heat exchanger design.
- Aluminized steel inshot burners delivers smooth ignition.
- Compact 33 inch cabinet height.
- 80 percent high efficiency blower motor.
- Self diagnostics saves last 5 fault codes even during a power interruption.
- Electronic air cleaner and humidifier terminals.
- Silicon nitride ignitor.
- Removable floor base for bottom return air.
Included:
- (2) screws, (3) wire nuts, (1) snap bushing, (1) snap plug, (1) wire tie.
Similar Gas Furnace Products
MrCool MGM80SE070B3A Description
- 1245 CFM.
- 17.5 inch cabinet size.
- Covers about 1900 square foot.
- ECM motor.
- Single stage gas valve.
- Upflow/horizontal.
- Input BTU/H: 66,000; output BTU/H: 52,800.
- 1.5-3 ton cooling capacity.
- 1/2 inch gas inlet.
- 120 volts, 60 Hz, 1 phase.
- 15 amps.
- 10 x 10 blower size.
- Temperature rise range: 40 to 70 degrees F.
- 5 speed motor.
- Gas type: NG (LP with optional kit).
- 1/2 HP.
- AHRI Certified.
- 10 year warranty when registered
- Left or right utility connections.
- Aluminum heat exchanger design.
- Aluminized steel inshot burners delivers smooth ignition.
- Compact 33 inch cabinet height.
- 80 percent high efficiency blower motor.
- Self diagnostics saves last 5 fault codes even during a power interruption.
- Electronic air cleaner and humidifier terminals.
- Silicon nitride ignitor.
- Removable floor base for bottom return air.
Included:
- (2) screws, (3) wire nuts, (1) snap bushing, (1) snap plug, (1) wire tie.
Similar Gas Furnace Products
Heating Capacity
70000 BTU/H
sku MCL-MGM80SE070B3A
$1,249.99Each
In Stock-
Ships between Dec. 26 - Dec. 30
Product Specifications
| Part Number | MGM80SE070B3A |
| Air Flow (CFM) | 1245 |
| Certificate | Prop65 |
| Cooling Capacity | 3 Ton |
| Electrical Phase | 1 Ph |
| Heating Capacity | 70000 BTU/H |
| Inner Package | 1 |
| Material | Aluminum |
| Maximum Amperage | 15 Amp |
| Maximum Voltage | 120V |
| Warranty | 10 Yr |
| Product Dimensions | 28.50-in X 17.50-in X 33-in |
| Weight | 127.00-lb |
| UPC | 810512033621 |
Manufacturer Description
MRCOOL 80% AFUE 70K BTU 1200 CFM Upflow/Horizontal Single-Stage Multi-Speed ECM Motor Furnace with 17.5" Cabinet
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This gas furnace from MRCOOL with an upflow or horizontal configuration heats your home with a CFM up to 1245, delivering comfort at an 80% energy efficiency rating. Shop more HVAC solutions at HomElectrical today!
Heating Capacity
70000 BTU/H
sku MCL-MGM80SE070B3A
$1,249.99Each
In Stock-
Ships between Dec. 26 - Dec. 30
Similar Gas Furnace Products
MrCool MGM80SE070B3A Description
- 1245 CFM.
- 17.5 inch cabinet size.
- Covers about 1900 square foot.
- ECM motor.
- Single stage gas valve.
- Upflow/horizontal.
- Input BTU/H: 66,000; output BTU/H: 52,800.
- 1.5-3 ton cooling capacity.
- 1/2 inch gas inlet.
- 120 volts, 60 Hz, 1 phase.
- 15 amps.
- 10 x 10 blower size.
- Temperature rise range: 40 to 70 degrees F.
- 5 speed motor.
- Gas type: NG (LP with optional kit).
- 1/2 HP.
- AHRI Certified.
- 10 year warranty when registered
- Left or right utility connections.
- Aluminum heat exchanger design.
- Aluminized steel inshot burners delivers smooth ignition.
- Compact 33 inch cabinet height.
- 80 percent high efficiency blower motor.
- Self diagnostics saves last 5 fault codes even during a power interruption.
- Electronic air cleaner and humidifier terminals.
- Silicon nitride ignitor.
- Removable floor base for bottom return air.
Included:
- (2) screws, (3) wire nuts, (1) snap bushing, (1) snap plug, (1) wire tie.
Product Specifications
| Part Number | MGM80SE070B3A |
| Air Flow (CFM) | 1245 |
| Certificate | Prop65 |
| Cooling Capacity | 3 Ton |
| Electrical Phase | 1 Ph |
| Heating Capacity | 70000 BTU/H |
| Inner Package | 1 |
| Material | Aluminum |
| Maximum Amperage | 15 Amp |
| Maximum Voltage | 120V |
| Warranty | 10 Yr |
| Product Dimensions | 28.50-in X 17.50-in X 33-in |
| Weight | 127.00-lb |
| UPC | 810512033621 |
Manufacturer Description
MRCOOL 80% AFUE 70K BTU 1200 CFM Upflow/Horizontal Single-Stage Multi-Speed ECM Motor Furnace with 17.5" Cabinet
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?