Stelpro 7500W Explosion-Proof Unit Heater w/ Thermostat, 38 Amps, 25595 BTU/H, 1 Ph, 208V
Stelpro EU233-CA-0086C-T
SKU STP-EU233CA0086CT
Stelpro's Explosion-Proof Unit Heaters are ideal for hazardous environments involving lethal and flammable substances. Shop HomElectrical for more Stelpro products today!
Image may not depict product actual color, inclusions or accessories
Stelpro's Explosion-Proof Unit Heaters are ideal for hazardous environments involving lethal and flammable substances. Shop HomElectrical for more Stelpro products today!
Stelpro 7500W Explosion-Proof Unit Heater w/ Built-in Thermostat, 1 Ph, 208V features:
- Beige color finish, powder coat material.
- 14-gauge galvanized steel cabinet.
- Adjustable louvers(with minimum opening safety stops).
- Thermal protection with automatic reset, thermal protection with manual reset.
- Explosion-proof double-shielded permanently lubricated ball bearing motor, aluminum fan blade.
- Non-toxic, inhibited, propylene glycol heat transfer fluid, low 70 PSIG pressure relief valve.
- Factory-mounted, housed in a NEMA 7 or 9 cast aluminum enclosure.
- Automatic and manual reset overtemperature cutouts.
- Controlling magnetic contactor and 24V control circuit transformer included with standard controls.
- Wall, ceiling or pole installation w/ use of mounting brackets (not included but mandatory).
- Approved installation locations: Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E(optional), F and G; Class I, Zones 1 and 2, Group IIB.
- Temperature code T3C, 160'C(320'F).
- 1 year warranty.
Similar Unit Heater Products
Stelpro EU233-CA-0086C-T Description
Stelpro 7500W Explosion-Proof Unit Heater w/ Built-in Thermostat, 1 Ph, 208V features:
- Beige color finish, powder coat material.
- 14-gauge galvanized steel cabinet.
- Adjustable louvers(with minimum opening safety stops).
- Thermal protection with automatic reset, thermal protection with manual reset.
- Explosion-proof double-shielded permanently lubricated ball bearing motor, aluminum fan blade.
- Non-toxic, inhibited, propylene glycol heat transfer fluid, low 70 PSIG pressure relief valve.
- Factory-mounted, housed in a NEMA 7 or 9 cast aluminum enclosure.
- Automatic and manual reset overtemperature cutouts.
- Controlling magnetic contactor and 24V control circuit transformer included with standard controls.
- Wall, ceiling or pole installation w/ use of mounting brackets (not included but mandatory).
- Approved installation locations: Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E(optional), F and G; Class I, Zones 1 and 2, Group IIB.
- Temperature code T3C, 160'C(320'F).
- 1 year warranty.
Similar Unit Heater Products
$6,264.48Each
Usually Ships 1-2 Months
Product Specifications
| Part Number | EU233-CA-0086C-T |
| Certificate | CSA US |
| Color / Finish | Beige |
| Electrical Phase | 1 Ph |
| Material | Steel, Aluminum |
| Maximum Voltage | 208V |
| Warranty | 1 Yr |
| Wattage | 7500W |
| Product Dimensions | 21.75-in X 16.06-in X 19.38-in |
| Weight | 110.00-lb |
| UPC | 626296271926 |
Manufacturer Description
EXPLOSION PROOF UNIT HEATER B/I STAT 7500W 208V 1PH
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Stelpro's Explosion-Proof Unit Heaters are ideal for hazardous environments involving lethal and flammable substances. Shop HomElectrical for more Stelpro products today!
$6,264.48Each
Usually Ships 1-2 Months
Similar Unit Heater Products
Stelpro EU233-CA-0086C-T Description
Stelpro 7500W Explosion-Proof Unit Heater w/ Built-in Thermostat, 1 Ph, 208V features:
- Beige color finish, powder coat material.
- 14-gauge galvanized steel cabinet.
- Adjustable louvers(with minimum opening safety stops).
- Thermal protection with automatic reset, thermal protection with manual reset.
- Explosion-proof double-shielded permanently lubricated ball bearing motor, aluminum fan blade.
- Non-toxic, inhibited, propylene glycol heat transfer fluid, low 70 PSIG pressure relief valve.
- Factory-mounted, housed in a NEMA 7 or 9 cast aluminum enclosure.
- Automatic and manual reset overtemperature cutouts.
- Controlling magnetic contactor and 24V control circuit transformer included with standard controls.
- Wall, ceiling or pole installation w/ use of mounting brackets (not included but mandatory).
- Approved installation locations: Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E(optional), F and G; Class I, Zones 1 and 2, Group IIB.
- Temperature code T3C, 160'C(320'F).
- 1 year warranty.
Product Specifications
| Part Number | EU233-CA-0086C-T |
| Certificate | CSA US |
| Color / Finish | Beige |
| Electrical Phase | 1 Ph |
| Material | Steel, Aluminum |
| Maximum Voltage | 208V |
| Warranty | 1 Yr |
| Wattage | 7500W |
| Product Dimensions | 21.75-in X 16.06-in X 19.38-in |
| Weight | 110.00-lb |
| UPC | 626296271926 |
Manufacturer Description
EXPLOSION PROOF UNIT HEATER B/I STAT 7500W 208V 1PH
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?