Stelpro 800W Convection Floor Insert Heater, Medium Density, 120 V, Silver

Stelpro FI12081S
SKU STP-FI12081S
The Stelpro Floor Insert FI Fan Heater is ideal for those with a need for convection electric heat but don't have the proper wall space for installation.
Stelpro 800W Convection Floor Insert Heater, Medium Density, 120 V, Silver

Image may not depict product actual color, inclusions or accessories

The Stelpro Floor Insert FI Fan Heater is ideal for those with a need for convection electric heat but don't have the proper wall space for installation.

Stelpro 800W Convection Floor Insert Heater, Medium Density, 120 V, Silver features:

  • Medium density unit - 200 watts per linear foot.
  • Protective wire mesh prevents unwanted objects from entering the unit.
  • Epoxy-polyester powder coat keeps unit looking new.
  • 18-gauge galvanized steel cabinet.
  • 9-gauge extruded aluminum grill.
  • Thermal protection with manual reset eliminates fire hazard and over heating.
  • Single tubular, stainless steel sheathed element with boxed aluminum fins improves heat dissipation.
  • Element is securely fastened at its center.
  • Floating in nylon sleeves at each end, eliminating expansion and contraction noises.
  • Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
  • Floor recessed.
  • Recessed parallel to floor joists.
  • Can be installed in concrete floors without any additional framing.
  • Air vents on sides may be blocked but may not maximize air output.

Stelpro FI12081S Description

Stelpro 800W Convection Floor Insert Heater, Medium Density, 120 V, Silver features:

  • Medium density unit - 200 watts per linear foot.
  • Protective wire mesh prevents unwanted objects from entering the unit.
  • Epoxy-polyester powder coat keeps unit looking new.
  • 18-gauge galvanized steel cabinet.
  • 9-gauge extruded aluminum grill.
  • Thermal protection with manual reset eliminates fire hazard and over heating.
  • Single tubular, stainless steel sheathed element with boxed aluminum fins improves heat dissipation.
  • Element is securely fastened at its center.
  • Floating in nylon sleeves at each end, eliminating expansion and contraction noises.
  • Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
  • Floor recessed.
  • Recessed parallel to floor joists.
  • Can be installed in concrete floors without any additional framing.
  • Air vents on sides may be blocked but may not maximize air output.

This page is for your reference only.
Shop for similar Floor Heating

Product Specifications

Part NumberFI12081S, STP-FI12081S
Color / FinishSilver
Electrical Phase1 Ph
Heating TechnologyConvection
Maximum Voltage120V
Room Size150 Sq Ft
Sealed BatteryNo
Warranty3 Yrs
Wattage800W
Weight30.00-lb
UPC626296160800
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
The Stelpro Floor Insert FI Fan Heater is ideal for those with a need for convection electric heat but don't have the proper wall space for installation.
Stelpro 800W Convection Floor Insert Heater, Medium Density, 120 V, Silver

This page is for your reference only.
Shop for similar Floor Heating

Stelpro FI12081S Description

Stelpro 800W Convection Floor Insert Heater, Medium Density, 120 V, Silver features:

  • Medium density unit - 200 watts per linear foot.
  • Protective wire mesh prevents unwanted objects from entering the unit.
  • Epoxy-polyester powder coat keeps unit looking new.
  • 18-gauge galvanized steel cabinet.
  • 9-gauge extruded aluminum grill.
  • Thermal protection with manual reset eliminates fire hazard and over heating.
  • Single tubular, stainless steel sheathed element with boxed aluminum fins improves heat dissipation.
  • Element is securely fastened at its center.
  • Floating in nylon sleeves at each end, eliminating expansion and contraction noises.
  • Wall thermostat (not included) - the use of an electronic thermostat is strongly recommended.
  • Floor recessed.
  • Recessed parallel to floor joists.
  • Can be installed in concrete floors without any additional framing.
  • Air vents on sides may be blocked but may not maximize air output.

Product Specifications

Part NumberFI12081S, STP-FI12081S
Color / FinishSilver
Electrical Phase1 Ph
Heating TechnologyConvection
Maximum Voltage120V
Room Size150 Sq Ft
Sealed BatteryNo
Warranty3 Yrs
Wattage800W
Weight30.00-lb
UPC626296160800
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.

Product Questions & Answers

Customer Reviews

0 out of 5
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%
Need Assistance?