Wago Chassis Mount Terminal Strip w/o Contact, 4 Conductor, 3-Pole, Snap-in, Black
Wago 862-1593
SKU WAG-8621593
This 4 conductor, 3 pole chassis-mount terminal strip without ground contact in black with snap-in mounting feet at position 1 & 3 was developed specifically to minimize wiring costs. Shop more Wago products at HomElectrical now!
Image may not depict product actual color, inclusions or accessories
This 4 conductor, 3 pole chassis-mount terminal strip without ground contact in black with snap-in mounting feet at position 1 & 3 was developed specifically to minimize wiring costs. Shop more Wago products at HomElectrical now!
- Pack of 200.
- Conductors: 4.
- Poles: 3.
- Color: Black.
- PE-N-L1.
- Snap-in foot at position 1 and 3.
- Wire Sizes:
- Solid Conductor: 0.5..4 mm / 20..12 AWG.
- Solid Conductor; Push-in termination: 0.75..4 mm / 18..12 AWG.
- Stranded Conductor: 0.5..4 mm / 20..12 AWG.
- Fine-Stranded Conductor: 0.5..4 mm / 20..12 AWG.
- Fine-Stranded Conductor; with insulated ferrule: 0.5..2.5 mm / 20..12 AWG.
- Fine-Stranded Conductor; with ferrule; push-in termination: 0.75 mm / 18 AWG.
- Strip Length: 10..11 mm / 0.39..0.43 inch.
- Wiring Type: Side-entry wiring.
- Ratings per IEC/EN 60664-1:
- Rated Voltage 500V.
- Rated Surge Voltage: 6kV.
- Rated Current: 32 Amp.
- Connection Technology: Push-in Cage Clamp.
- Connectable conductor materials: Copper.
- 862 Series chassis-mount terminal strips were developed specifically to minimize wiring costs, while accommodating requirements for flexible mounting, multiple connection points and easy usage.
- Equipped with push in cage clamp, the 862 Series connects up to four conductors sized 0.5 to 4 mm (20..12 AWG).
- For factory wiring, push in cage clamp connection technology allows solid conductors, ultrasonically bonded conductors from 0.5..4 mm (20..12 AWG; length of bonded conductor end: min.10 mm) or fine-stranded conductors with ferrules from 1 to 2.5 mm (18..14 AWG) to be terminated by simply pushing them into the unit.
- Convenient automatic grounding contact (optional).
- Snap-in mounting feet for fast assembly.
- Push-buttons for easy installation with an operating tool, or by hand.
- Built-in test points simplify testing with 2 mm test plug.
- Flexible marking options with standard marking (pre-marked), marking strip or custom marked for large orders.
- RoHS Compliant, UR Listed.
Similar Terminal Block Products
Wago 862-1593 Description
- Pack of 200.
- Conductors: 4.
- Poles: 3.
- Color: Black.
- PE-N-L1.
- Snap-in foot at position 1 and 3.
- Wire Sizes:
- Solid Conductor: 0.5..4 mm / 20..12 AWG.
- Solid Conductor; Push-in termination: 0.75..4 mm / 18..12 AWG.
- Stranded Conductor: 0.5..4 mm / 20..12 AWG.
- Fine-Stranded Conductor: 0.5..4 mm / 20..12 AWG.
- Fine-Stranded Conductor; with insulated ferrule: 0.5..2.5 mm / 20..12 AWG.
- Fine-Stranded Conductor; with ferrule; push-in termination: 0.75 mm / 18 AWG.
- Strip Length: 10..11 mm / 0.39..0.43 inch.
- Wiring Type: Side-entry wiring.
- Ratings per IEC/EN 60664-1:
- Rated Voltage 500V.
- Rated Surge Voltage: 6kV.
- Rated Current: 32 Amp.
- Connection Technology: Push-in Cage Clamp.
- Connectable conductor materials: Copper.
- 862 Series chassis-mount terminal strips were developed specifically to minimize wiring costs, while accommodating requirements for flexible mounting, multiple connection points and easy usage.
- Equipped with push in cage clamp, the 862 Series connects up to four conductors sized 0.5 to 4 mm (20..12 AWG).
- For factory wiring, push in cage clamp connection technology allows solid conductors, ultrasonically bonded conductors from 0.5..4 mm (20..12 AWG; length of bonded conductor end: min.10 mm) or fine-stranded conductors with ferrules from 1 to 2.5 mm (18..14 AWG) to be terminated by simply pushing them into the unit.
- Convenient automatic grounding contact (optional).
- Snap-in mounting feet for fast assembly.
- Push-buttons for easy installation with an operating tool, or by hand.
- Built-in test points simplify testing with 2 mm test plug.
- Flexible marking options with standard marking (pre-marked), marking strip or custom marked for large orders.
- RoHS Compliant, UR Listed.
Similar Terminal Block Products
Free Shipping Eligible
$1.58Each
Sold by the Case of 250 for only $395.00
In Stock-
Ships between Nov. 5 - Nov. 11
Product Specifications
| Part Number | 862-1593, 51131498 |
| Certificate | RoHS Compliant, UR Listed |
| Color / Finish | Black |
| Inner Package | 1 |
| Maximum Voltage | 500V |
| Product Dimensions | 22.30-mm X 36-mm X 35-mm |
| Weight | 0.05-lb |
| UPC | 4044918509633 |
Manufacturer Description
4-conductor chassis-mount terminal strip; 3-pole; PE-N-L1; without ground contact; 4 mm²; 4,00 mm²; black
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This 4 conductor, 3 pole chassis-mount terminal strip without ground contact in black with snap-in mounting feet at position 1 & 3 was developed specifically to minimize wiring costs. Shop more Wago products at HomElectrical now!
Free Shipping Eligible
$1.58Each
Sold by the Case of 250 for only $395.00
In Stock-
Ships between Nov. 5 - Nov. 11
Similar Terminal Block Products
Wago 862-1593 Description
- Pack of 200.
- Conductors: 4.
- Poles: 3.
- Color: Black.
- PE-N-L1.
- Snap-in foot at position 1 and 3.
- Wire Sizes:
- Solid Conductor: 0.5..4 mm / 20..12 AWG.
- Solid Conductor; Push-in termination: 0.75..4 mm / 18..12 AWG.
- Stranded Conductor: 0.5..4 mm / 20..12 AWG.
- Fine-Stranded Conductor: 0.5..4 mm / 20..12 AWG.
- Fine-Stranded Conductor; with insulated ferrule: 0.5..2.5 mm / 20..12 AWG.
- Fine-Stranded Conductor; with ferrule; push-in termination: 0.75 mm / 18 AWG.
- Strip Length: 10..11 mm / 0.39..0.43 inch.
- Wiring Type: Side-entry wiring.
- Ratings per IEC/EN 60664-1:
- Rated Voltage 500V.
- Rated Surge Voltage: 6kV.
- Rated Current: 32 Amp.
- Connection Technology: Push-in Cage Clamp.
- Connectable conductor materials: Copper.
- 862 Series chassis-mount terminal strips were developed specifically to minimize wiring costs, while accommodating requirements for flexible mounting, multiple connection points and easy usage.
- Equipped with push in cage clamp, the 862 Series connects up to four conductors sized 0.5 to 4 mm (20..12 AWG).
- For factory wiring, push in cage clamp connection technology allows solid conductors, ultrasonically bonded conductors from 0.5..4 mm (20..12 AWG; length of bonded conductor end: min.10 mm) or fine-stranded conductors with ferrules from 1 to 2.5 mm (18..14 AWG) to be terminated by simply pushing them into the unit.
- Convenient automatic grounding contact (optional).
- Snap-in mounting feet for fast assembly.
- Push-buttons for easy installation with an operating tool, or by hand.
- Built-in test points simplify testing with 2 mm test plug.
- Flexible marking options with standard marking (pre-marked), marking strip or custom marked for large orders.
- RoHS Compliant, UR Listed.
Product Specifications
| Part Number | 862-1593, 51131498 |
| Certificate | RoHS Compliant, UR Listed |
| Color / Finish | Black |
| Inner Package | 1 |
| Maximum Voltage | 500V |
| Product Dimensions | 22.30-mm X 36-mm X 35-mm |
| Weight | 0.05-lb |
| UPC | 4044918509633 |
Manufacturer Description
4-conductor chassis-mount terminal strip; 3-pole; PE-N-L1; without ground contact; 4 mm²; 4,00 mm²; black
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?