Diode LED 40W SwitchEX+ LED Driver & Dimmer Switch, 120V/12V
Diode LED SXP-12V40W
SKU DLD-SXP12V40W
Diode LED's 40W SWITCHEX+ Driver and Dimmer Combo is a low voltage, LED driver and dimmer combined in a single gang box. Simplify your installation and save money with this award winning product! Shop HomElectrical for more Diode LED products!
Image may not depict product actual color, inclusions or accessories
Diode LED's 40W SWITCHEX+ Driver and Dimmer Combo is a low voltage, LED driver and dimmer combined in a single gang box. Simplify your installation and save money with this award winning product! Shop HomElectrical for more Diode LED products!
Accepts 120VAC then converts it to 12VDC low voltage. Installable in standard electrical gang.
- Dimming range 100%-1% with Load sensing auto-trim.
- Single-pole or 3-way install using a mechanical switch.
- Compatible with standard industry trim plates and colors.
- Meets Class 2 standards.
- Ambient temperature: 32-104'F (0-40'C).
- Includes: White face plate, voltage partition, 7x wire connectors, 2x mounting screws.
- Short circuit, thermal runaway, overload, and over voltage internal protection.
- Working humidity: 8-90% relative humidity, non-condensing.
- Efficiency: Over 91% at 120VAC max load.
- No minimum load.
- Input Wired Connection, 6 inch 18AWG bare wire leads.
- Output Wired Connection, 6 inch 18AWG bare wire leads.
- Total Harmonic Distortion: less than 20%.
- Recommended for use with the following tape light series
- Alphatech X.
- Graze X.
- Neon Blaze.
- OBD Flex Optics.
- Valent / Valent Wet Location / Valent X / Valent X Wet Location.
- StreamLite / Streamlite Wet Location / Streamlite Colors / Streamlite Colors Wet Location.
- Blaze / Blaze Wet Location / Blaze Colors / Blaze Mini / Blaze X / Blaze X Wet Location.
- Linaire Flex 3D Bend / Linaire Flex Micro Side Bend / Linaire Flex Mini 3D / Linaire Flex Side Bend / Linaire Flex Top Bend / Linaire Flex Tube 360.
- Black, Brown, Gray, Light Almond, or White Faceplates (SOLD SEPARATELY).
- Product is intended to be installed by a licensed electrician. Only use copper wiring.
Similar Dimmer Switches Products
Diode LED SXP-12V40W Description
Accepts 120VAC then converts it to 12VDC low voltage. Installable in standard electrical gang.
- Dimming range 100%-1% with Load sensing auto-trim.
- Single-pole or 3-way install using a mechanical switch.
- Compatible with standard industry trim plates and colors.
- Meets Class 2 standards.
- Ambient temperature: 32-104'F (0-40'C).
- Includes: White face plate, voltage partition, 7x wire connectors, 2x mounting screws.
- Short circuit, thermal runaway, overload, and over voltage internal protection.
- Working humidity: 8-90% relative humidity, non-condensing.
- Efficiency: Over 91% at 120VAC max load.
- No minimum load.
- Input Wired Connection, 6 inch 18AWG bare wire leads.
- Output Wired Connection, 6 inch 18AWG bare wire leads.
- Total Harmonic Distortion: less than 20%.
- Recommended for use with the following tape light series
- Alphatech X.
- Graze X.
- Neon Blaze.
- OBD Flex Optics.
- Valent / Valent Wet Location / Valent X / Valent X Wet Location.
- StreamLite / Streamlite Wet Location / Streamlite Colors / Streamlite Colors Wet Location.
- Blaze / Blaze Wet Location / Blaze Colors / Blaze Mini / Blaze X / Blaze X Wet Location.
- Linaire Flex 3D Bend / Linaire Flex Micro Side Bend / Linaire Flex Mini 3D / Linaire Flex Side Bend / Linaire Flex Top Bend / Linaire Flex Tube 360.
- Black, Brown, Gray, Light Almond, or White Faceplates (SOLD SEPARATELY).
- Product is intended to be installed by a licensed electrician. Only use copper wiring.
Similar Dimmer Switches Products
Free Shipping
$169.23Each
In Stock-
Ships between Dec. 26 - Dec. 30
Product Specifications
| Part Number | SXP-12V40W |
| Color / Finish | White |
| Connection Type | Hardwired |
| Dimmable | Yes |
| Inner Package | 1 |
| Power Supply | 0.97 |
| Self-Ground | No |
| Warranty | 5 Yr |
| Wattage | 40W |
| Weather Resistant | No |
| Wire Gauge | 18 AWG |
| Weight | 0.50-lb |
| UPC | 848333039782 |
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Diode LED's 40W SWITCHEX+ Driver and Dimmer Combo is a low voltage, LED driver and dimmer combined in a single gang box. Simplify your installation and save money with this award winning product! Shop HomElectrical for more Diode LED products!
Free Shipping
$169.23Each
In Stock-
Ships between Dec. 26 - Dec. 30
Similar Dimmer Switches Products
Diode LED SXP-12V40W Description
Accepts 120VAC then converts it to 12VDC low voltage. Installable in standard electrical gang.
- Dimming range 100%-1% with Load sensing auto-trim.
- Single-pole or 3-way install using a mechanical switch.
- Compatible with standard industry trim plates and colors.
- Meets Class 2 standards.
- Ambient temperature: 32-104'F (0-40'C).
- Includes: White face plate, voltage partition, 7x wire connectors, 2x mounting screws.
- Short circuit, thermal runaway, overload, and over voltage internal protection.
- Working humidity: 8-90% relative humidity, non-condensing.
- Efficiency: Over 91% at 120VAC max load.
- No minimum load.
- Input Wired Connection, 6 inch 18AWG bare wire leads.
- Output Wired Connection, 6 inch 18AWG bare wire leads.
- Total Harmonic Distortion: less than 20%.
- Recommended for use with the following tape light series
- Alphatech X.
- Graze X.
- Neon Blaze.
- OBD Flex Optics.
- Valent / Valent Wet Location / Valent X / Valent X Wet Location.
- StreamLite / Streamlite Wet Location / Streamlite Colors / Streamlite Colors Wet Location.
- Blaze / Blaze Wet Location / Blaze Colors / Blaze Mini / Blaze X / Blaze X Wet Location.
- Linaire Flex 3D Bend / Linaire Flex Micro Side Bend / Linaire Flex Mini 3D / Linaire Flex Side Bend / Linaire Flex Top Bend / Linaire Flex Tube 360.
- Black, Brown, Gray, Light Almond, or White Faceplates (SOLD SEPARATELY).
- Product is intended to be installed by a licensed electrician. Only use copper wiring.
Product Specifications
| Part Number | SXP-12V40W |
| Color / Finish | White |
| Connection Type | Hardwired |
| Dimmable | Yes |
| Inner Package | 1 |
| Power Supply | 0.97 |
| Self-Ground | No |
| Warranty | 5 Yr |
| Wattage | 40W |
| Weather Resistant | No |
| Wire Gauge | 18 AWG |
| Weight | 0.50-lb |
| UPC | 848333039782 |
Resources & Download
A PDF viewer is required to view this product's information. Download Adobe Acrobat Viewer
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?