Diode LED 60W SwitchEX+ LED Driver & Dimmer Switch, 120V/12V
Diode LED SXP-12V60W
SKU DLD-SXP12V60W
Diode LED's 60W SWITCHEX+ Driver and Dimmer Combo is a low voltage, LED driver and dimmer combined in a single gang box. Simplify your installation and save money with this award winning product! Shop HomElectrical for more Diode LED products!
Similar Dimmer Switches Products
Diode LED SXP-12V60W Description
Accepts 120VAC then converts it to 12VDC low voltage. Installable in standard electrical gang.
- Dimming range 100%-1% with Load sensing auto-trim.
- Single-pole or 3-way install using a mechanical switch.
- Compatible with standard industry trim plates and colors.
- Meets Class 2 standards.
- Ambient temperature: 32-104'F (0-40'C).
- Includes: White face plate, voltage partition, 7x wire connectors, 2x mounting screws.
- Short circuit, thermal runaway, overload, and over voltage internal protection.
- Working humidity: 8-90% relative humidity, non-condensing.
- Efficiency: Over 91% at 120VAC max load.
- No minimum load.
- Input Wired Connection, 6 inch 18AWG bare wire leads.
- Output Wired Connection, 6 inch 18AWG bare wire leads.
- Total Harmonic Distortion: less than 20%.
- Recommended for use with the following tape light series
- Alphatech X.
- Graze X.
- Neon Blaze.
- OBD Flex Optics.
- Valent / Valent Wet Location / Valent X / Valent X Wet Location.
- StreamLite / Streamlite Wet Location / Streamlite Colors / Streamlite Colors Wet Location.
- Blaze / Blaze Wet Location / Blaze Colors / Blaze Mini / Blaze X / Blaze X Wet Location.
- Linaire Flex 3D Bend / Linaire Flex Micro Side Bend / Linaire Flex Mini 3D / Linaire Flex Side Bend / Linaire Flex Top Bend / Linaire Flex Tube 360.
- Black, Brown, Gray, Light Almond, or White Faceplates (SOLD SEPARATELY).
- Product is intended to be installed by a licensed electrician. Only use copper wiring.
Need Assistance?