Halco LED T5 Tube

The amount of LED T5 Tubes you can connect depends on the light fixture and the power draw of the tubes compared to the power capacity of the circuit.. It is possible to connect many T5 tubes if they do not overload the power source. While there is not a specific amount of LED T5 Tubes to use, consider the user manual, product specifications, and the rated maximum load of the circuit. Refer to your user manual, product specifications, and the rated maximum load of their circuit.

To change the LED T5 Tube light follow the steps below. Make sure to handle the lights carefully so you do not drop them.

• First, turn the power off to the circuit breaker. This will prevent you from getting shocked when you are changing the tube light.
• Once the power is off, turn the old tube slightly to loosen the fixture and remove it.
• Take the new LED T5 Tube light and push it into the lamp holder. Then turn the lamp to fit it in place.
• When the lamp is securely in the holder, turn the power back on and see if the lamp works.