US Motors 5600W TEFC Hostile Duty Motor, 254TC, 1185RPM, 7-1/2HP, 208V-230V/460V
US Motors H7P3DC
SKU EMB-H7P3DC
US Motors' 5600W TEFC hostile duty motor with 254TC FRME, 975/1185 RPM, 7-1/2 HP, rated for 208V-230V/460V and made for process-related industries requiring protection within harsh operating conditions. Check out more motors at HomElectrical now!
Image may not depict product actual color, inclusions or accessories
US Motors' 5600W TEFC hostile duty motor with 254TC FRME, 975/1185 RPM, 7-1/2 HP, rated for 208V-230V/460V and made for process-related industries requiring protection within harsh operating conditions. Check out more motors at HomElectrical now!
- Motor Enclosure: TEFC.
- HP: 7-1/2.
- Kilowatts: 5.6.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 975/1185.
- Hertz: 50/60.
- Volts: 208-230/460.
- FRME: 254.
- Shaft Code: TC.
- Mounting: Horz-Footed.
- Motor Type: CTE.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- Hostile Duty.
- Premium efficient.
- C-Face.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- Cast Iron Frame (140: Rolled Steel), Cast Iron End Brackets.
- Stainless Steel Nameplate (with CE Mark) & Zinc Plated Hardware.
- Shaft Slinger On Pulley End For IP54 Protection.
- Dual Voltage 230/460 Volts (1-100 HP).
- 40 C Ambient, NEMA Design B Performance On 60 Hz Sine Wave Power.
- Regreasable Ball Bearings 250 Frame & Up, Lifting Provisions 180 Frame & Up.
- Double Shielded Bearings 140-360, Open On 400-440.
- 1.15 Service Factor @ 60 Hz.
- Steel Fan Cover & Conduit Box.
- Field Convertible To F2 Mounting 180 Frame & Larger.
- Condensation Drains With Plastic Plugs.
- Conversion Kits: All Cast Iron Upgrade, C&D Flanges, Canopy Kits (except 320-360).
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
US Motors H7P3DC Description
- Motor Enclosure: TEFC.
- HP: 7-1/2.
- Kilowatts: 5.6.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 975/1185.
- Hertz: 50/60.
- Volts: 208-230/460.
- FRME: 254.
- Shaft Code: TC.
- Mounting: Horz-Footed.
- Motor Type: CTE.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- Hostile Duty.
- Premium efficient.
- C-Face.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- Cast Iron Frame (140: Rolled Steel), Cast Iron End Brackets.
- Stainless Steel Nameplate (with CE Mark) & Zinc Plated Hardware.
- Shaft Slinger On Pulley End For IP54 Protection.
- Dual Voltage 230/460 Volts (1-100 HP).
- 40 C Ambient, NEMA Design B Performance On 60 Hz Sine Wave Power.
- Regreasable Ball Bearings 250 Frame & Up, Lifting Provisions 180 Frame & Up.
- Double Shielded Bearings 140-360, Open On 400-440.
- 1.15 Service Factor @ 60 Hz.
- Steel Fan Cover & Conduit Box.
- Field Convertible To F2 Mounting 180 Frame & Larger.
- Condensation Drains With Plastic Plugs.
- Conversion Kits: All Cast Iron Upgrade, C&D Flanges, Canopy Kits (except 320-360).
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
$2,604.64Each
Usually Ships 2-4 Weeks
Product Specifications
| Part Number | H7P3DC |
| Electrical Phase | 3 Ph |
| Horsepower | 7-1/2 |
| Inner Package | 1 |
| Maximum Voltage | 208V-230V/460V |
| RPM | 1185 |
| Product Dimensions | 26.13-in X 13.25-in X 12.94-in |
| Weight | 300.00-lb |
Manufacturer Description
7 1/2 HP, 1185 & 975 RPM, H7P3DC, 208-230/460 & 190/380 V, 60 & 50 HZ, 254TC
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
US Motors' 5600W TEFC hostile duty motor with 254TC FRME, 975/1185 RPM, 7-1/2 HP, rated for 208V-230V/460V and made for process-related industries requiring protection within harsh operating conditions. Check out more motors at HomElectrical now!
$2,604.64Each
Usually Ships 2-4 Weeks
Similar HVAC Fan Motor Products
US Motors H7P3DC Description
- Motor Enclosure: TEFC.
- HP: 7-1/2.
- Kilowatts: 5.6.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 975/1185.
- Hertz: 50/60.
- Volts: 208-230/460.
- FRME: 254.
- Shaft Code: TC.
- Mounting: Horz-Footed.
- Motor Type: CTE.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- Hostile Duty.
- Premium efficient.
- C-Face.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- Cast Iron Frame (140: Rolled Steel), Cast Iron End Brackets.
- Stainless Steel Nameplate (with CE Mark) & Zinc Plated Hardware.
- Shaft Slinger On Pulley End For IP54 Protection.
- Dual Voltage 230/460 Volts (1-100 HP).
- 40 C Ambient, NEMA Design B Performance On 60 Hz Sine Wave Power.
- Regreasable Ball Bearings 250 Frame & Up, Lifting Provisions 180 Frame & Up.
- Double Shielded Bearings 140-360, Open On 400-440.
- 1.15 Service Factor @ 60 Hz.
- Steel Fan Cover & Conduit Box.
- Field Convertible To F2 Mounting 180 Frame & Larger.
- Condensation Drains With Plastic Plugs.
- Conversion Kits: All Cast Iron Upgrade, C&D Flanges, Canopy Kits (except 320-360).
- cUL/UL Listed, CSA US.
Product Specifications
| Part Number | H7P3DC |
| Electrical Phase | 3 Ph |
| Horsepower | 7-1/2 |
| Inner Package | 1 |
| Maximum Voltage | 208V-230V/460V |
| RPM | 1185 |
| Product Dimensions | 26.13-in X 13.25-in X 12.94-in |
| Weight | 300.00-lb |
Manufacturer Description
7 1/2 HP, 1185 & 975 RPM, H7P3DC, 208-230/460 & 190/380 V, 60 & 50 HZ, 254TC
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?