Gardner Bender Hydraulic Bender System w/Pump

Gardner Bender Hydraulic Bender System w/Pump features:

• Includes shoe groups 2.5-in, 3.0-in, 3.5-in and 4.0-in.
• Includes: MB400 Bend-Mate Table, Long Stroke Ultra Eegor Hydraulic Bender (B400L), P408S Electric Pump, 1 Each Bending Shoe sizes: 2.5-in, 3-in, 3.5-in, 4-in, 1 Each Follow bar size; 2.5-in, 3-in, 3.5-in, 4-in, 1 Each U-strap sizes: 2.5-in, 3-in, 3.5-in, 4-in, U-strap Pin, Bend Shoe Pin, 30-Ton Double-Acting Hyd.Cyl, 2 - 10-ft Hoses w/High-Flow Coupler and Double Anchor Frame Pin.
• Bends 2.5 inch to 4 inch Rigid, Rigid aluminum, EMT and IMC conduit.
• Hydraulic power ensures the smoothest bends without deformations to the conduit.
• Double -acting cylinder offers rapid retraction regardless of hose lengths and system losses.
• Conduit is automatically stripped free from the shoe during the return cycle virtually eliminating extra labor or damaged conduit.
• Ample work/bending area.
• Convenient Cylinder support.
• Single person set-up.
• Fits through 32 in doorway (28 in wide table).
• Forklift pockets on all four sides.
• Onboard storage for all bending shoes, follow bars, pins and hydraulic pump.
• Security bars protect shoes follow bars, pump and bender for overnight storage on the job site.
• Protected hose routing.
• Powered and Hydraulic Equipment.
• Includes pump.