How to install LED Flat Panel Light?
Installing an LED Panel light is a simple task that does not take too much time. However, please consult with a licensed electrician to complete the installation. Below are the steps they would take to install the LED panel light.
- Cut the power to your circuit breaker. Ensure the switch on the circuit breaker is to the correct fixture in your home.
- Remove the AC line voltage whip from the panel light.
- Once the AC line is removed, pull the fixture out of the wall.
- Pull down the fixture whip and remove the existing bracket.
- Put the LED panel light where the old light fixture used to be.
- Connect the AC line voltage to the new panel light.
- Close up the ceiling by putting the safety clips in place. Then, turn on the power and see if the panel light works.
This will complete the installation!