US Motors 149100W WM Corro-Duty Motor, 449T FRME, 1190 RPM, 200 HP, 575V
US Motors CD200P3G
SKU EMB-CD200P3G
US Motors' 149100W Corro-Duty motor has a 449T FRME, 1190 RPM, 200 HP, rated for 575V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Browse more at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
US Motors' 149100W Corro-Duty motor has a 449T FRME, 1190 RPM, 200 HP, rated for 575V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Browse more at HomElectrical today!
- Motor Enclosure: TEFC-IP55.
- HP: 200.
- Kilowatts: 149.1.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 1190.
- Hertz: 60.
- Volts: 575.
- FRME: 449.
- Shaft Code: T.
- Mounting: Horz-Footed.
- Motor Type: TCE.
- Bearing: 6313-J/C3.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- World motor CORRO-DUTY.
- NEMA Premium efficient.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- All Cast Iron Construction.
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate & Zinc Plated Hardware.
- Dual Bearing Seals On Pulley End For IP55 Protection.
- Dual Voltage 230/460 Volts (1-100 HP).
- Precision Balance (< 0.08 In/Sec Vibration).
- NEMA Design B Performance On 60 Hz Sine Wave Power.
- 1.15 Service Factor @ 60 Hz.
- Self-Certified Class I, Division 2, Groups A, B, C, & D.
- Suitable for 20: 1 (3-60hz) Variable Torque; 5: 1 (12-60hz) Constant Torque On Inverter Power.
- Regreasable Open Bearings.
- Lifting Provisions, Epoxy Coated Rotor.
- Field Convertible To F2 Mounting.
- Brass Breather Condensation Drains.
- Oversized Conduit Box - 1 Size Larger Than NEMA Standard.
- Cast Iron Inner Bearing Caps.
- Conversion Kits: C&D Flanges, Canopy Kits.
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
US Motors CD200P3G Description
- Motor Enclosure: TEFC-IP55.
- HP: 200.
- Kilowatts: 149.1.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 1190.
- Hertz: 60.
- Volts: 575.
- FRME: 449.
- Shaft Code: T.
- Mounting: Horz-Footed.
- Motor Type: TCE.
- Bearing: 6313-J/C3.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- World motor CORRO-DUTY.
- NEMA Premium efficient.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- All Cast Iron Construction.
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate & Zinc Plated Hardware.
- Dual Bearing Seals On Pulley End For IP55 Protection.
- Dual Voltage 230/460 Volts (1-100 HP).
- Precision Balance (< 0.08 In/Sec Vibration).
- NEMA Design B Performance On 60 Hz Sine Wave Power.
- 1.15 Service Factor @ 60 Hz.
- Self-Certified Class I, Division 2, Groups A, B, C, & D.
- Suitable for 20: 1 (3-60hz) Variable Torque; 5: 1 (12-60hz) Constant Torque On Inverter Power.
- Regreasable Open Bearings.
- Lifting Provisions, Epoxy Coated Rotor.
- Field Convertible To F2 Mounting.
- Brass Breather Condensation Drains.
- Oversized Conduit Box - 1 Size Larger Than NEMA Standard.
- Cast Iron Inner Bearing Caps.
- Conversion Kits: C&D Flanges, Canopy Kits.
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
Free Shipping
$26,358.44Each
Usually Ships 2-4 Weeks
Product Specifications
| Part Number | CD200P3G |
| Electrical Phase | 3 Ph |
| Horsepower | 200 |
| Inner Package | 1 |
| Input Frequency | 60 Hz |
| RPM | 1190 |
| Product Dimensions | 53-in X 23.78-in X 23-in |
| Weight | 2,270.00-lb |
Manufacturer Description
200 HP - TEFC-IP55 - 1190 RPM
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
US Motors' 149100W Corro-Duty motor has a 449T FRME, 1190 RPM, 200 HP, rated for 575V and made for pulp & paper, mill & chemical and any other severe duty environments found in the process industries. Browse more at HomElectrical today!
Free Shipping
$26,358.44Each
Usually Ships 2-4 Weeks
Similar HVAC Fan Motor Products
US Motors CD200P3G Description
- Motor Enclosure: TEFC-IP55.
- HP: 200.
- Kilowatts: 149.1.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 1190.
- Hertz: 60.
- Volts: 575.
- FRME: 449.
- Shaft Code: T.
- Mounting: Horz-Footed.
- Motor Type: TCE.
- Bearing: 6313-J/C3.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- World motor CORRO-DUTY.
- NEMA Premium efficient.
- Class F Insulation, Class B Rise At Full Load On 60 Hertz Sine Wave Power.
- All Cast Iron Construction.
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate & Zinc Plated Hardware.
- Dual Bearing Seals On Pulley End For IP55 Protection.
- Dual Voltage 230/460 Volts (1-100 HP).
- Precision Balance (< 0.08 In/Sec Vibration).
- NEMA Design B Performance On 60 Hz Sine Wave Power.
- 1.15 Service Factor @ 60 Hz.
- Self-Certified Class I, Division 2, Groups A, B, C, & D.
- Suitable for 20: 1 (3-60hz) Variable Torque; 5: 1 (12-60hz) Constant Torque On Inverter Power.
- Regreasable Open Bearings.
- Lifting Provisions, Epoxy Coated Rotor.
- Field Convertible To F2 Mounting.
- Brass Breather Condensation Drains.
- Oversized Conduit Box - 1 Size Larger Than NEMA Standard.
- Cast Iron Inner Bearing Caps.
- Conversion Kits: C&D Flanges, Canopy Kits.
- cUL/UL Listed, CSA US.
Product Specifications
| Part Number | CD200P3G |
| Electrical Phase | 3 Ph |
| Horsepower | 200 |
| Inner Package | 1 |
| Input Frequency | 60 Hz |
| RPM | 1190 |
| Product Dimensions | 53-in X 23.78-in X 23-in |
| Weight | 2,270.00-lb |
Manufacturer Description
200 HP - TEFC-IP55 - 1190 RPM
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?