US Motors 700W Hazardous Location Motor, 143T FRME, 1160 RPM, 1 HP, 230V/460V

US Motors X1P3B
SKU EMB-X1P3B
US Motors' 700W hazardous location motor has 143T FRME, 1160 RPM, 1 HP, 230V/460V and made for pumps, fans compressors, conveyors and tools located in hazardous locations as defined by Class and Group. Browse more at HomElectrical.com today!
US Motors 700W Hazardous Location Motor, 143T FRME, 1160 RPM, 1 HP, 230V/460V

Image may not depict product actual color, inclusions or accessories

US Motors' 700W hazardous location motor has 143T FRME, 1160 RPM, 1 HP, 230V/460V and made for pumps, fans compressors, conveyors and tools located in hazardous locations as defined by Class and Group. Browse more at HomElectrical.com today!
  • Motor Enclosure: TEFC.
  • HP: 1.
  • Kilowatts: 0.7.
  • Poles: 6.
  • Number of Speeds: 1.
  • RPM: 1160.
  • Hertz: 60.
  • Volts: 230/460.
  • FRME: 143.
  • Shaft Code: T.
  • Mounting: Horz-footed.
  • Motor Type: LE.
  • Bearing: 6203-2Z-J/C3.
  • Rotation: Dual.
  • Three phase.
  • General purpose hazardous location.
  • Totally enclosed fan cooled (TEFC).
  • Dual label.
  • Premium efficient.
  • Cast Iron Inner Bearing Caps (180 Frame and Larger).
  • 40 C Ambient, NEMA Design B Performance.
  • Regreasable Bearings 180 Frame & Up.
  • Lifting Provisions, 180 Frame & Up.
  • Conversion Kits: Cast Iron Fan Cover (180 Frame & Up).
  • Sealed Bearings 56-140, Shielded 180 Frame & Up.
  • Class, Group & Temp Code as Noted Below.
  • Cast Iron Frame Except Where Noted.
  • Cast Iron End Brackets & Conduit Box.
  • Class F Insulation.
  • 1 Service Factor on 60 Hertz Sinewave Power.
  • Stainless Steel Nameplate & Zinc Plated Hardware.
  • Shaft Slinger on Pulley End for IP54 Protection.
  • cUL/UL Listed, CSA US.

US Motors X1P3B Description

  • Motor Enclosure: TEFC.
  • HP: 1.
  • Kilowatts: 0.7.
  • Poles: 6.
  • Number of Speeds: 1.
  • RPM: 1160.
  • Hertz: 60.
  • Volts: 230/460.
  • FRME: 143.
  • Shaft Code: T.
  • Mounting: Horz-footed.
  • Motor Type: LE.
  • Bearing: 6203-2Z-J/C3.
  • Rotation: Dual.
  • Three phase.
  • General purpose hazardous location.
  • Totally enclosed fan cooled (TEFC).
  • Dual label.
  • Premium efficient.
  • Cast Iron Inner Bearing Caps (180 Frame and Larger).
  • 40 C Ambient, NEMA Design B Performance.
  • Regreasable Bearings 180 Frame & Up.
  • Lifting Provisions, 180 Frame & Up.
  • Conversion Kits: Cast Iron Fan Cover (180 Frame & Up).
  • Sealed Bearings 56-140, Shielded 180 Frame & Up.
  • Class, Group & Temp Code as Noted Below.
  • Cast Iron Frame Except Where Noted.
  • Cast Iron End Brackets & Conduit Box.
  • Class F Insulation.
  • 1 Service Factor on 60 Hertz Sinewave Power.
  • Stainless Steel Nameplate & Zinc Plated Hardware.
  • Shaft Slinger on Pulley End for IP54 Protection.
  • cUL/UL Listed, CSA US.
$1,344.99Each

Usually Ships 2-4 Weeks

Product Specifications

Part NumberX1P3B
Electrical Phase3 Ph
Horsepower1
Inner Package1
Maximum Voltage230V/460V
RPM1160
Wattage700W
Product Dimensions12.88-in X 7.88-in X 7.50-in
Weight80.00-lb
UPC786382090005

Manufacturer Description

1 HP, 1160 RPM, X1P3B, 230/460 V, 60 HZ, 145T
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
US Motors' 700W hazardous location motor has 143T FRME, 1160 RPM, 1 HP, 230V/460V and made for pumps, fans compressors, conveyors and tools located in hazardous locations as defined by Class and Group. Browse more at HomElectrical.com today!
US Motors 700W Hazardous Location Motor, 143T FRME, 1160 RPM, 1 HP, 230V/460V
$1,344.99Each

Usually Ships 2-4 Weeks

US Motors X1P3B Description

  • Motor Enclosure: TEFC.
  • HP: 1.
  • Kilowatts: 0.7.
  • Poles: 6.
  • Number of Speeds: 1.
  • RPM: 1160.
  • Hertz: 60.
  • Volts: 230/460.
  • FRME: 143.
  • Shaft Code: T.
  • Mounting: Horz-footed.
  • Motor Type: LE.
  • Bearing: 6203-2Z-J/C3.
  • Rotation: Dual.
  • Three phase.
  • General purpose hazardous location.
  • Totally enclosed fan cooled (TEFC).
  • Dual label.
  • Premium efficient.
  • Cast Iron Inner Bearing Caps (180 Frame and Larger).
  • 40 C Ambient, NEMA Design B Performance.
  • Regreasable Bearings 180 Frame & Up.
  • Lifting Provisions, 180 Frame & Up.
  • Conversion Kits: Cast Iron Fan Cover (180 Frame & Up).
  • Sealed Bearings 56-140, Shielded 180 Frame & Up.
  • Class, Group & Temp Code as Noted Below.
  • Cast Iron Frame Except Where Noted.
  • Cast Iron End Brackets & Conduit Box.
  • Class F Insulation.
  • 1 Service Factor on 60 Hertz Sinewave Power.
  • Stainless Steel Nameplate & Zinc Plated Hardware.
  • Shaft Slinger on Pulley End for IP54 Protection.
  • cUL/UL Listed, CSA US.

Product Specifications

Part NumberX1P3B
Electrical Phase3 Ph
Horsepower1
Inner Package1
Maximum Voltage230V/460V
RPM1160
Wattage700W
Product Dimensions12.88-in X 7.88-in X 7.50-in
Weight80.00-lb
UPC786382090005

Manufacturer Description

1 HP, 1160 RPM, X1P3B, 230/460 V, 60 HZ, 145T
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.

Product Questions & Answers

Customer Reviews

0 out of 5
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%
Need Assistance?