US Motors 2200W Hazardous Corro-Duty Motor, 213T FRME, 1175 RPM, 3 HP, 230V/460V
US Motors YC3P3B
SKU EMB-YC3P3B
US Motors' 2200W hazardous corro-duty motor has 213T FRME, 1175 RPM, 3 HP, 230V/460V and made for pumps, fans compressors, conveyors and tools located in hazardous locations as defined by Class and Group. Check out more at HomElectrical today!
Image may not depict product actual color, inclusions or accessories
US Motors' 2200W hazardous corro-duty motor has 213T FRME, 1175 RPM, 3 HP, 230V/460V and made for pumps, fans compressors, conveyors and tools located in hazardous locations as defined by Class and Group. Check out more at HomElectrical today!
- Motor Enclosure: TEFC.
- HP: 3.
- Kilowatts: 2.2.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 1175.
- Hertz: 60.
- Volts: 230/460.
- FRME: 213.
- Shaft Code: T.
- Mounting: Horz-footed.
- Motor Type: LCE.
- Bearing: 6206-J/C3.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- Hazardous location.
- Energy efficient.
- Single label Corro-Duty.
- All Cast Iron Construction (140 Frame Has Steel Base).
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate & Zinc Plated Hardware.
- Shaft Slinger On Pulley End For IP54 Protection.
- Cast Iron Inner Bearing Caps (180 Frame & Larger).
- 40 C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- Regreasable Bearings 180 Frame & Up, Lifting Provisions 180 Frame & Up.
- Sealed Bearings 213-140, Shielded 180-360, Open 400-440 Frames.
- Class F Insulation, Listed For Ambients -25 C To +40 C.
- Brass Breather Plug.
- Suitable For Inverter Use Per Policy Statement In Introduction, 2: 1 CT.
- Class I (Group D), T2B Temperature Code.
- 1.15 Service Factor On 60 Hertz Sinewave Power.
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
US Motors YC3P3B Description
- Motor Enclosure: TEFC.
- HP: 3.
- Kilowatts: 2.2.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 1175.
- Hertz: 60.
- Volts: 230/460.
- FRME: 213.
- Shaft Code: T.
- Mounting: Horz-footed.
- Motor Type: LCE.
- Bearing: 6206-J/C3.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- Hazardous location.
- Energy efficient.
- Single label Corro-Duty.
- All Cast Iron Construction (140 Frame Has Steel Base).
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate & Zinc Plated Hardware.
- Shaft Slinger On Pulley End For IP54 Protection.
- Cast Iron Inner Bearing Caps (180 Frame & Larger).
- 40 C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- Regreasable Bearings 180 Frame & Up, Lifting Provisions 180 Frame & Up.
- Sealed Bearings 213-140, Shielded 180-360, Open 400-440 Frames.
- Class F Insulation, Listed For Ambients -25 C To +40 C.
- Brass Breather Plug.
- Suitable For Inverter Use Per Policy Statement In Introduction, 2: 1 CT.
- Class I (Group D), T2B Temperature Code.
- 1.15 Service Factor On 60 Hertz Sinewave Power.
- cUL/UL Listed, CSA US.
Similar HVAC Fan Motor Products
Free Shipping
$2,229.88Each
Usually Ships 2-4 Weeks
Product Specifications
| Part Number | YC3P3B |
| Electrical Phase | 3 Ph |
| Horsepower | 3 |
| Inner Package | 1 |
| Maximum Voltage | 230V/460V |
| RPM | 1175 |
| Wattage | 2200W |
| Product Dimensions | 20-in X 11-in X 10.75-in |
| Weight | 145.00-lb |
| UPC | 786382092474 |
Manufacturer Description
3 HP, 1175 RPM, YC3P3B, 230/460 V, 60 HZ, 213T
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
US Motors' 2200W hazardous corro-duty motor has 213T FRME, 1175 RPM, 3 HP, 230V/460V and made for pumps, fans compressors, conveyors and tools located in hazardous locations as defined by Class and Group. Check out more at HomElectrical today!
Free Shipping
$2,229.88Each
Usually Ships 2-4 Weeks
Similar HVAC Fan Motor Products
US Motors YC3P3B Description
- Motor Enclosure: TEFC.
- HP: 3.
- Kilowatts: 2.2.
- Poles: 6.
- Number of Speeds: 1.
- RPM: 1175.
- Hertz: 60.
- Volts: 230/460.
- FRME: 213.
- Shaft Code: T.
- Mounting: Horz-footed.
- Motor Type: LCE.
- Bearing: 6206-J/C3.
- Rotation: Dual.
- General purpose.
- Three phase totally enclosed fan cooled (TEFC).
- Hazardous location.
- Energy efficient.
- Single label Corro-Duty.
- All Cast Iron Construction (140 Frame Has Steel Base).
- Corrosion Resistant Mill & Chemical Duty Paint.
- Stainless Steel Nameplate & Zinc Plated Hardware.
- Shaft Slinger On Pulley End For IP54 Protection.
- Cast Iron Inner Bearing Caps (180 Frame & Larger).
- 40 C Ambient, NEMA Design B Performance On 60 Hertz Sine Wave Power.
- Regreasable Bearings 180 Frame & Up, Lifting Provisions 180 Frame & Up.
- Sealed Bearings 213-140, Shielded 180-360, Open 400-440 Frames.
- Class F Insulation, Listed For Ambients -25 C To +40 C.
- Brass Breather Plug.
- Suitable For Inverter Use Per Policy Statement In Introduction, 2: 1 CT.
- Class I (Group D), T2B Temperature Code.
- 1.15 Service Factor On 60 Hertz Sinewave Power.
- cUL/UL Listed, CSA US.
Product Specifications
| Part Number | YC3P3B |
| Electrical Phase | 3 Ph |
| Horsepower | 3 |
| Inner Package | 1 |
| Maximum Voltage | 230V/460V |
| RPM | 1175 |
| Wattage | 2200W |
| Product Dimensions | 20-in X 11-in X 10.75-in |
| Weight | 145.00-lb |
| UPC | 786382092474 |
Manufacturer Description
3 HP, 1175 RPM, YC3P3B, 230/460 V, 60 HZ, 213T
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?