Nuvo Lighting Cornerstone Collection

Before hanging Nuvo’s Cornerstone Collection hanging wall lanterns, please ask a professional electrician for assistance.

Below are the steps the electrician will take to hang the Nuvo Cornerstone hanging wall lantern.

• Before hanging the lantern, the electrician will ensure the power is off.
• Once the power is off, the electrician will fasten the cross bar onto the outlet box using 2 outlet box screws.
• Then they will hook one link to the loop of the canopy and the other loop will hook to the fixture.
• They will then connect the corresponding wires together ensuring each wire is accounted for.
• When the electrician puts all the wiring together, they will fasten the canopy to the ceiling.
• Then they will install the bulb and turn the power on to see if the fixture is working.

Ask a professional electrician to replace the outdoor light fixture for you. Below are the steps they should take to replace the outdoor light fixture.

• Step 1: They will inspect the new light fixture
• Step 2: They will then turn off the power
• Step 3: Once the power is off, they will remove the existing light fixture
• Step 4: The electrician will then check for power with the voltage tester
• Step 5: They will disconnect the wires from the old light fixture
• Step 6: Then they will attach the new mounting bracket
• Step 7: They will also connect the wires to the new light fixture
• Step 8: They will add the wire nuts
• Step 9: Then they will install the new light fixture and test to see if it works