Nuvo Lighting Neval Collection
How to remove flush mount ceiling light?
To remove the flush mount ceiling light, make sure to turn off the power first. This will protect you from any serious injuries.
Next, you will take down the old light fixture by removing any screws or bolts holding the fixture in place.
When the fixture is off the wall, you will need to detach the wires from the wall. To do this use a voltage tester to ensure the power is off.
Once you check to see if the power is off, then you can disconnect the wires from the wall.
It is recommended to disconnect the black wires first then the white wires then finally disconnecting the ground wires.
Once the wires are disconnected, this will complete the removal of the flush mount.
Disclaimer: If you are not a licensed professional in electrical wiring, HomElectrical does not recommend DIY installation. Always hire an electrician for any, and all, electrical needs.
How to clean flush mount ceiling lights?
Cleaning Nuvo’s Neval Flush Mount Light is pretty simple. However, make sure to follow the steps Nuvo has provided so that the light continues to look its best.
To clean the light fixture, make sure to wipe the fixture with a soft cloth. Then clean the glass with a mild soap. Do not clean the fixture with materials that will scratch or ruin the fixture.