Nuvo Lighting Willow Collection

If the chandelier goes over a table in the dining room, you will need to find a chandelier with a diameter that is between 50 and 75% of the tabletop.

To find the optimal size for your chandelier, use the following formula:

Before wiring Nuvo’s 240W Willow Pendant Light, make sure to hire a licensed electrician to do the wiring correctly. Below are some of the wiring steps the electrician will do to wire the pendant.

• When wiring the pendant, the electrician will pull the wires through the loop, chain, top finial nut, canopy, top finial loop and the threaded stem on the mount.
• Once the wires are pulled through, the electrician will connect the wires with writing on them to the fixture with the black wire from the circuit breaker. Then they will connect the wire that does not have writing on it and connect it to the white wire.
• Then they will cover the connection by using wire connectors.
• The electrician will tie the ground wires from the fixture and the outlet box the the ground screw on the mounting bracket. They will then put the wires inside the outlet box.
• This completes the wiring process of a pendant light.

A semi-flush mount light is a type of ceiling-mounted light fixture. Semi-flush mounts provide ambient light and have a small gap from the wall unlike their flush mount counterparts. These lights tend to be larger and more decorative than flush mounts.

Most semi-flush mounts make areas like hallways, bathrooms and laundry room visually appealing. These lights are also important because they reflect the light that goes off the ceiling down to the floor.