Nuvo Lighting Diego Collection

Please make sure to hire a licensed electrician to do the installation for you. Once the electrician is hired, below are the steps they would take to install the Nuvo Diego Collection wall lantern.

• Step 1: The electrician will unpack the parts and put the parts to the side.
• Step 2: The electrician will prepare the light socket.
• Step 3: Then they will install the correct bulb.
• Step 4: Using the mounting screws, they will then turn off the power and secure the mounting bar to the wall junction.
• Step 5: The electrician will then connect corresponding wires to each other.
• Step 6: When the electrician completes the wiring, they will secure the fixture to the wall outlet box.
• Step 7: They will then turn the power back on and test to see if the light fixture works.

To remove a flush mount ceiling light, consult with a licensed electrician. Below are the steps they will take to remove it.

• First, the electrician will turn off the breaker box to stop the electricity from flowing through the system.
• Then they will remove the glass from the fixture.
• Once the glass is removed, they will unscrew the screws attaching to the fixture.
• This will allow the entire unit to twist off.
• Once the fixture is off, they will untwist the wiring connections and finally remove the fixture.
• This finishes the steps to removing the flush mount.