Nuvo Lighting Hartley Collection

Converting a can light to a pendant light should be done by a licensed electrician. Electricians follow specific steps to convert can lights to pendant lights. Below are the simple steps they will follow:

• Step 1: It is recommended that the electrician turn the electricity off before beginning the conversion.
• Step 2: To start the conversion, the electrician will remove the bulb and the plaster ring from the can light.
• Step 3: Then they will screw a converter into the light socket.
• Step 4: Once the converter is in the light socket, the electrician will attach the bracket to the can light.
• Step 5: They will then place the cover plate on the fixture.
• Step 6: Once the plate is on, the electrician will connect the wires using wire nuts.
• Step 7: Then they will screw in the bracket and adjust the height of the lamp.
• Step 8: When the height is adjusted, the electrician will put on the decorative plate and screw in the pendant.
• Step 9: The electrician will then attach the glass shade and bulb. Once the bulb is in place, they will turn the power back on and test to see if the light works.

Installing Nuvo’s Hartley pendant comes with an installation guide. The steps are straightforward, however please consult a licensed electrician to do the installation. Below are simplified steps the electrician will take to complete the installation.

• To begin the installation, the electrician will turn off the power and gather all of the pieces together.
• Then they will secure the mounting bar to the outside box. They will also secure specific parts together.
• Once these steps are complete the electrician will connect to the corresponding wall wires.
• Then they will do the final touches on the light fixture and will turn the light on and see if it works.