Nuvo Lighting Lena Collection

Depending on the LED light, LED vanity lights can last as long as 50,000 hours. This allows for the vanity light to last between 15 and 20 years if used up to 12 hours daily. The Lena Collection offers LED vanity lights that will help you brighten up your vanity!

To install Nuvo’s 26W Lena Series LED Vanity Light follow the instructions below. Attached is the full installation manual that you can read when doing the installation.

• Step 1: Turn off the power to the circuit breaker and remove the contents of the fixture and place them on a clean surface.
• Step 2: Place the mounting plate in the junction box using the mounting screws.
• Step 3: Screw the screws into the mounting plate. Leave enough of the screw so the canopy can mount on it.
• Step 4: Pull the electrical wires out of the junction box and begin to make connections using wire nuts.
• Step 5: Put the grounding screw into the hole on the mounting bar. Wrap the ground wire from the fixture around the ground screw and connect it to the ground wire from the outlet box using a wire connector.
• Step 6: Analyze the colors of the wires and prepare to connect the wires to the junction box.
• Step 7: Take the black wires from the fixture and place them against the black wire from the outlet box. Then place a wire connector over the wires and screw the connector into place. Repeat these steps for the white wire as well.
• Step 8: Pull the canopy over the mounting plate and align it with the mounting screws. Then install a light bulb.
• After doing these steps, this completes the installation

Disclaimer: If you are not a licensed professional in electrical wiring, we do not recommend DIY installation. Always hire an electrician for any, and all, electrical needs.