Nuvo Lighting Parker Collection

To install Nuvo’s 100W Parker 1-Light Wall Mounted Vanity light, follow the installation instructions provided below.

1. Turn the power off and make sure you have all the pieces before starting the installation.
2. Begin the installation by threading the mounting screw into the circular strap. Then secure the circular strap to the outlet box.
3. Once that is completed, attach the wiring from the fixture to the corresponding wires in the wall.
4. When the wires are connected, tuck them away into the outlet box. Then secure the canopy on.
5. Then place the gap glass over the socket and secure it in place.
6. Then you can install the light bulbs. Once the bulbs are installed, you can turn the power back on and test to see if the lights work.

Disclaimer: If you are not a licensed professional in electrical wiring. HomElectrical does not recommend DIY installation. Always hire an electrician for any, and all, electrical needs.

For a 48-inch vanity, your vanity light fixture should fall between 24 and 36 inches wide. In general, the vanity fixture width should be about 75% the size of the vanity. This size is perfect for having the right amount of light for your grooming needs.