Nuvo Lighting Pendleton Collection

To fit Nuvo’s 100W Pendleton Series Pendant Light, follow the below steps from Nuvo’s Installation guide.

1. Turn off the power and ensure the parts are in the box.
2. Once the power is off, secure the mounting bar to the outlet box. Thread the nut onto the nipple so the five threads are exposed above the nut. Then insert the lock washer and thread the nipple into the mounting bar, then secure that with the nut.
3. Then you will need to thread the screw collar on the nipple. Slide the screw collar ring and the canopy over the chain. Then open one link of chain and connect it to the fixture loop. Open the other link of the chain and connect it to the collar loop and close the link.
4. You can then lace the wires through the chain and pass them through holes in the collar loop.
5. Once you complete those steps, you will then begin the wiring process. This includes finding the grounding wires and creating a Group A and B wiring section. The wiring process also includes you connecting the wires from the fixture to the wires in the wall.
6. When the wires are all connected, place the canopy on the ceiling and secure the collar ring. Then tuck the wires into the outlet box.
7. Then you will be able to install the light bulbs. Once the light bulbs are installed, you will be able to turn the power back on and test if the fixture works.

Disclaimer: If you are not a licensed professional in electrical wiring, HomElectrical does not recommend DIY installation. Always hire an electrician for any, and all, electrical needs.