Nuvo Lighting Teresa Collection

To wire Nuvo’s 100W Teresa Series Bell Pendant light follow the steps below. While it may seem easy, please consult with a licensed electrician to perform the wiring.

• To begin the wiring process, the electrician will put the grounding screw into the mounting bar. Then they will wrap the grounding wire from the fixture around the grounding screw and connect the wire to the grounding from the outlet box using a wire connector.
• Then the electrician will locate the black and white wires from the fixture. They will separate them and then place them against the corresponding wires coming from the outlet box.
• Once the fixture wires are against the outlet wires, the electrician will fit a wire connector over the wires and screw them on.
• This completes the wiring of a pendant light.

It is recommended that for a 7-foot island, you should have two pendants. We recommend placing the pendant lights 24-36 inches from each other and 6-12 inches from each end of the island. While these recommendations work for most homes, please measure your island and ceiling to match your placement preferences.