Dremel 3D40 Digilab Flex 3D Printer, 120V
Dremel 3D40-FLX-01
SKU BPT-3D40FLX01
Dremel's 3D40 3D printer is Dremel's best 3D printer for classroom or at home use. Appreciate the new removeable flexible build plate that makes it quick and easy to remove finished parts after printing. Shop more products at HomElectrical.com today!
Image may not depict product actual color, inclusions or accessories
Dremel's 3D40 3D printer is Dremel's best 3D printer for classroom or at home use. Appreciate the new removeable flexible build plate that makes it quick and easy to remove finished parts after printing. Shop more products at HomElectrical.com today!
- Filament Type: PLA Filament.
- Filament Diameter: 1.75mm.
- Cord Length: 5-ft.
- Minimum Layer Thickness/Resolution: 50 Microns.
- Maximum Build Height: 6-in.
- Maximum Build Depth: 10-in.
- Maximum Build Width: 6.7-in.
- Flexible build plate makes print removal quick, easy and painless.
- 50 micron ultra-high resolution to print fine details and features.
- Quick and easy setup with guided 2-point semi-automated leveling and automatic 9-point calibration.
- Draft mode printing profile to print up to 30 percent faster than current Dremel 3D40 in low resolution.
- Advanced control minimizes noise.
- Enhanced cooling system prevents warping and keeps objects crisp.
- Full color touch screen lets you go file to building effortlessly.
- Fully enclosed for protected building.
- Includes:
- 3D Printer.
- (1) Filament Spool.
- Power Cable.
- USB Cable.
- SD Card.
- Build Tape.
- Object Removal Tool.
- Unclog Tool.
- USB Flash Drive.
- Flexible Build Plate and Build Plate Holder.
Similar Printer Products
Dremel 3D40-FLX-01 Description
- Filament Type: PLA Filament.
- Filament Diameter: 1.75mm.
- Cord Length: 5-ft.
- Minimum Layer Thickness/Resolution: 50 Microns.
- Maximum Build Height: 6-in.
- Maximum Build Depth: 10-in.
- Maximum Build Width: 6.7-in.
- Flexible build plate makes print removal quick, easy and painless.
- 50 micron ultra-high resolution to print fine details and features.
- Quick and easy setup with guided 2-point semi-automated leveling and automatic 9-point calibration.
- Draft mode printing profile to print up to 30 percent faster than current Dremel 3D40 in low resolution.
- Advanced control minimizes noise.
- Enhanced cooling system prevents warping and keeps objects crisp.
- Full color touch screen lets you go file to building effortlessly.
- Fully enclosed for protected building.
- Includes:
- 3D Printer.
- (1) Filament Spool.
- Power Cable.
- USB Cable.
- SD Card.
- Build Tape.
- Object Removal Tool.
- Unclog Tool.
- USB Flash Drive.
- Flexible Build Plate and Build Plate Holder.
Similar Printer Products
This page is for your reference only.
Shop for similar Printer
Product Specifications
| Part Number | 3D40-FLX-01 |
| Certificate | cUL/UL Listed |
| Inner Package | 1 |
| Maximum Amperage | 1.8 Amp |
| Maximum Voltage | 120V |
| Product Dimensions | 19.30-in X 18.50-in X 22.90-in |
| Weight | 42.50-lb |
| UPC | 080596054281 |
Manufacturer Description
Dremel Digilab 3D40 Flex
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Dremel's 3D40 3D printer is Dremel's best 3D printer for classroom or at home use. Appreciate the new removeable flexible build plate that makes it quick and easy to remove finished parts after printing. Shop more products at HomElectrical.com today!
This page is for your reference only.
Shop for similar Printer
Similar Printer Products
Dremel 3D40-FLX-01 Description
- Filament Type: PLA Filament.
- Filament Diameter: 1.75mm.
- Cord Length: 5-ft.
- Minimum Layer Thickness/Resolution: 50 Microns.
- Maximum Build Height: 6-in.
- Maximum Build Depth: 10-in.
- Maximum Build Width: 6.7-in.
- Flexible build plate makes print removal quick, easy and painless.
- 50 micron ultra-high resolution to print fine details and features.
- Quick and easy setup with guided 2-point semi-automated leveling and automatic 9-point calibration.
- Draft mode printing profile to print up to 30 percent faster than current Dremel 3D40 in low resolution.
- Advanced control minimizes noise.
- Enhanced cooling system prevents warping and keeps objects crisp.
- Full color touch screen lets you go file to building effortlessly.
- Fully enclosed for protected building.
- Includes:
- 3D Printer.
- (1) Filament Spool.
- Power Cable.
- USB Cable.
- SD Card.
- Build Tape.
- Object Removal Tool.
- Unclog Tool.
- USB Flash Drive.
- Flexible Build Plate and Build Plate Holder.
Product Specifications
| Part Number | 3D40-FLX-01 |
| Certificate | cUL/UL Listed |
| Inner Package | 1 |
| Maximum Amperage | 1.8 Amp |
| Maximum Voltage | 120V |
| Product Dimensions | 19.30-in X 18.50-in X 22.90-in |
| Weight | 42.50-lb |
| UPC | 080596054281 |
Manufacturer Description
Dremel Digilab 3D40 Flex
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?