Rack-A-Tiers Wire Connectors

Using wire connectors is a simple task that makes working with wires even simpler. Rack-A-Tiers wire connectors are no exception and can be easily installed. With soldering clips that can simply be clipped onto wire, loomex conectors that can be directly placed into port openings in electrical boxes, and wire nut twisters that insert directly a power drill, life with connecting wires has never been easier thanks to Rack-A-Tiers!

Soldering clips hold strip wire in place to allow for a significantly easier and more convenient soldering process. To use a soldering clip:

• Clip onto the wires you want to connect
• Dab solder onto the connection to form the bond
• Repeat the process as needed
• When finished, simply remove the soldering clip

Rack-A-Tiers’ SolderM8 uses powerful suction cups on the back of the unit to stick to any surface, making soldering process even easier.

Rack-A-Tiers’ Pro-Lock Locking Connector was designed to prevent standard 15-amp 120-volt straight blade cords from pulling apart under stress. The Pro-Lock Locking Connector is made from a high-impact polycarbonate packing a pull strength of up to 80 pounds, horizontally AND vertically, eliminating any chance of accidental disconnections resulting in unnecessary power loss.

A straight blade is the standard, 15-amp 120-volt 3-prong plug found in use with most if not all your household appliances and devices. Rack-A-Tiers makes several products that help connect and hold these plugs in place, such as their Pro-Lock Locking Connector.

A loomex connector works to easily connect and secure NMSC cables into an electrical box. Rack-A-Tiers makes this 2-way wire connector in 1/2-in and 3/4-in sizes, providing versatility and security for a variety of cable sizes.

• 1/2-in connectors working with: single cables of 12/3, 10/3, and 10/2 sizes, and with up to two cables for 14/2, 14/3, and 12/2 sizes.
• 3/4-in connectors working with: single cables of 8/3 and 6/3 sizes.

A wire nut is a plastic end cap that covers manually twisted wire connections and holds them in place. Repeatedly tying wire nuts can be an extremely tedious process. Fortunately, Rack-A-Tiers’ XXL Nut Blaster simplifies this process by attaching to your drill and automatically twisting and tightening a wing nut in just 3-4 revolutions. Efficiently eliminate the repetitive, long and drawn-out process of manually tying wing nuts, with Rack-A-Tiers XXL Nut Blaster today.

When it comes to connecting wires and keeping them secure, choosing Rack-A-Tiers is something you won’t regret. Rack-A-Tiers products are made by electricians for electricians, so they understand the importance of keeping wires securely connected, along with the struggles that one can come across when connecting wires. From shortening the often agonizing wing nut twisting process with their XXL Nut Blaster, to keeping extension cords secure at up to 80 pounds of pull strength with their Pro-Lock Locking Connector, Rack-A-Tiers has the tool to help you simplify your life with connecting wires, available on HomElectrical.com