Satco LED Wall Light

Satco LED wall lights are great outdoor lighting fixtures often used for security outside of commercial or residential buildings. These lights feature a variety of beam angles to best illuminate the location of your choice. Shop at HomElectrical for all of your lighting needs today!
//

Can I retrofit my wall pack light for Satco LED?

When switching from a CFL bulb to an LED retrofit, you are replacing the bulb with efficient LED technology. One way to easily make the switch is by using LED corn bulbs. These bulbs come in a variety of sizes, including E26 or E39, and screw into the lighting fixture the same as a normal lightbulb would. Though retrofitting is an option, it may be smart to completely replace your fixture all together for an LED wall pack. Full replacement can be more cost-effective. No matter what you do, the transition to LEDs creates better and more efficient lighting as a whole. Read more about retrofitting your wall packs to LED!

Do Satco wall packs come with a photocell sensor, and if not, can one be installed?

Not all wall packs come with a photocell sensor, but more often than not, one can be installed. Depending on which wall mounted light you are using, some photocell sensors may not be available. For example, you are highly likely to find a Semi Cut Off LED Wall Pack with a sensor, but not as likely to find a Bulkhead Wall Light with one. Most outdoor light, such as semi and cut off wall packs, that act as security lights have the capability to have a sensor. Make sure when choosing your wall light to read if it is photocell compatible, has the photocell sold separately, or comes with the photocell sensor.

What is the difference between a Satco bulkhead wall light and a jelly jar fixture?

Bulkhead wall lights and jelly jars (vapor tight fixtures) are very similar in looks, but they are different. Jelly jars usually come with a round light and a piece that is attached to the wall, whereas a bulkhead wall light is always flush mounted to the wall. A jelly jar can be mounted to the wall or the ceiling.

Each fixture also replaces different types of lighting fixtures and are better in different locations such as bulkhead wall lights being better for outdoor lighting and jelly jars better and more appropriate for indoor lighting. They also have different beam angles. 

Where are Satco bulk head light typically used?

Bulkhead wall lights are outdoor lights. Because they are wet rated, they are often surface mounted outside of commercial and residential places as security lights, accent lighting, and other general wall lighting applications. They are a direct replacement for incandescent bulbs and contain no mercury or lead!  Read More
Need Assistance?