Steinel PIR & Ultrasonic OCC Sensor Wall Switch w/ Dimming, 120/230/277V, Gray
Steinel DT WLS DIM-GY
SKU STE-54549
Steinel's PIR & Ultrasonic occupancy sensor wall switch with 0-10V dimming in gray is made for controlling light in commercial spaces. Ideal for use in enclosed spaces no larger than 18-ft x 15-ft. Shop more sensors at HomElectrical.com today!
Image may not depict product actual color, inclusions or accessories
Steinel's PIR & Ultrasonic occupancy sensor wall switch with 0-10V dimming in gray is made for controlling light in commercial spaces. Ideal for use in enclosed spaces no larger than 18-ft x 15-ft. Shop more sensors at HomElectrical.com today!
- Gray.
- 0-800W for tungsten, magnetic or electronic ballast; 0-600W for CFL or LED electronic ballasts.
- 0-10 volt dimming PIR (passive infrared) wall switch vacancy sensor.
- Line voltage lighting control (120/230/277 VAC, 50/60 Hz).
- 180° coverage pattern.
- Manual ON (Factory Setting).
- Partial ON can be adjusted from 10 to 70%.
- Partial OFF can be adjusted from 10 to 50%.
- Hold OFF or Force OFF light level feature.
- Mounts to a single-gang NEMA-style, standard switch box & decorator-style wall plate by others.
- Switch Link communication allows for up to 4 sensors to be grouped together.
- IQ Mode dynamically adjusts the ON time delay by learning individual room occupancy.
- Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds.
- Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected.
- Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF, DIM UP and DIM down buttons.
- The Button Link feature allows the installer to enable or disable communication of the DIM UP, ON/OFF and DIM DOWN manual button on the Switch Link communication traveler.
- Optional voltage barrier included to provide separation from class 1 and class 2 circuits.
- cUL/UL Listed, RoHS Compliant.
- 5 Year Warranty.
Similar In-Wall Occupancy & Motion Sensor Products
Steinel DT WLS DIM-GY Description
- Gray.
- 0-800W for tungsten, magnetic or electronic ballast; 0-600W for CFL or LED electronic ballasts.
- 0-10 volt dimming PIR (passive infrared) wall switch vacancy sensor.
- Line voltage lighting control (120/230/277 VAC, 50/60 Hz).
- 180° coverage pattern.
- Manual ON (Factory Setting).
- Partial ON can be adjusted from 10 to 70%.
- Partial OFF can be adjusted from 10 to 50%.
- Hold OFF or Force OFF light level feature.
- Mounts to a single-gang NEMA-style, standard switch box & decorator-style wall plate by others.
- Switch Link communication allows for up to 4 sensors to be grouped together.
- IQ Mode dynamically adjusts the ON time delay by learning individual room occupancy.
- Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds.
- Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected.
- Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF, DIM UP and DIM down buttons.
- The Button Link feature allows the installer to enable or disable communication of the DIM UP, ON/OFF and DIM DOWN manual button on the Switch Link communication traveler.
- Optional voltage barrier included to provide separation from class 1 and class 2 circuits.
- cUL/UL Listed, RoHS Compliant.
- 5 Year Warranty.
Similar In-Wall Occupancy & Motion Sensor Products
Free Shipping
$175.38Each
In Stock-
Ships between Dec. 30 - Jan. 2
Product Specifications
| Part Number | DT WLS DIM-GY, 54549 |
| Certificate | cUL/UL Listed, RoHS Compliant |
| Inner Package | 1 |
| Maximum Voltage | 120V, 230V, 277V |
| Product Dimensions | 4.13-in X 1.74-in X 1.83-in |
| Weight | 0.30-lb |
Manufacturer Description
Dualtech PIR & 40 kHz Ultrasonic, 0-10 Volt Dimming, Wall Switch Occupancy Sensor, 180 Coverage, 120/230/277 VAC, 50/60 Hz, Gray
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Steinel's PIR & Ultrasonic occupancy sensor wall switch with 0-10V dimming in gray is made for controlling light in commercial spaces. Ideal for use in enclosed spaces no larger than 18-ft x 15-ft. Shop more sensors at HomElectrical.com today!
Free Shipping
$175.38Each
In Stock-
Ships between Dec. 30 - Jan. 2
Similar In-Wall Occupancy & Motion Sensor Products
Steinel DT WLS DIM-GY Description
- Gray.
- 0-800W for tungsten, magnetic or electronic ballast; 0-600W for CFL or LED electronic ballasts.
- 0-10 volt dimming PIR (passive infrared) wall switch vacancy sensor.
- Line voltage lighting control (120/230/277 VAC, 50/60 Hz).
- 180° coverage pattern.
- Manual ON (Factory Setting).
- Partial ON can be adjusted from 10 to 70%.
- Partial OFF can be adjusted from 10 to 50%.
- Hold OFF or Force OFF light level feature.
- Mounts to a single-gang NEMA-style, standard switch box & decorator-style wall plate by others.
- Switch Link communication allows for up to 4 sensors to be grouped together.
- IQ Mode dynamically adjusts the ON time delay by learning individual room occupancy.
- Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds.
- Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected.
- Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF, DIM UP and DIM down buttons.
- The Button Link feature allows the installer to enable or disable communication of the DIM UP, ON/OFF and DIM DOWN manual button on the Switch Link communication traveler.
- Optional voltage barrier included to provide separation from class 1 and class 2 circuits.
- cUL/UL Listed, RoHS Compliant.
- 5 Year Warranty.
Product Specifications
| Part Number | DT WLS DIM-GY, 54549 |
| Certificate | cUL/UL Listed, RoHS Compliant |
| Inner Package | 1 |
| Maximum Voltage | 120V, 230V, 277V |
| Product Dimensions | 4.13-in X 1.74-in X 1.83-in |
| Weight | 0.30-lb |
Manufacturer Description
Dualtech PIR & 40 kHz Ultrasonic, 0-10 Volt Dimming, Wall Switch Occupancy Sensor, 180 Coverage, 120/230/277 VAC, 50/60 Hz, Gray
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?