Steinel PIR Vacancy Sensor Wall Switch w/ Dimming, 120/230/277V, Gray
Steinel IR VS DIM-GY
SKU STE-54898
Steinel's PIR vacancy sensor wall switch with dimming has a gray finish and is used where the sensor will have a clear view of the occupants. For best performance use in enclosed spaces no larger than 18-ft x 15-ft. Shop HomElectrical today!
Image may not depict product actual color, inclusions or accessories
Steinel's PIR vacancy sensor wall switch with dimming has a gray finish and is used where the sensor will have a clear view of the occupants. For best performance use in enclosed spaces no larger than 18-ft x 15-ft. Shop HomElectrical today!
- Gray.
- 0-800W for tungsten, magnetic or electronic ballast; 0-600W for CFL or LED electronic ballasts.
- 0-10 volt dimming PIR (passive infrared) wall switch vacancy sensor.
- Line voltage lighting control (120/230/277 VAC, 50/60 Hz).
- 180° coverage pattern.
- Manual ON (Factory Setting).
- Partial ON can be adjusted from 10 to 70%.
- Partial OFF can be adjusted from 10 to 50%.
- Hold OFF or Force OFF light level feature.
- Mounts to a single-gang NEMA-style, standard switch box and decorator-style wall plate by others.
- Switch Link communication allows for up to 4 sensors to be grouped together.
- IQ Mode dynamically adjusts the ON time delay by learning individual room occupancy.
- Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds.
- Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected.
- Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF, DIM UP and DIM down buttons.
- The Button Link feature allows the installer to enable or disable communication of the DIM UP, ON/OFF and DIM DOWN manual button on the Switch Link communication traveler.
- Optional voltage barrier included to provide separation from class 1 and class 2 circuits.
- cUL/UL Listed, RoHS Compliant.
- 5 Year Warranty.
Similar In-Wall Occupancy & Motion Sensor Products
Steinel IR VS DIM-GY Description
- Gray.
- 0-800W for tungsten, magnetic or electronic ballast; 0-600W for CFL or LED electronic ballasts.
- 0-10 volt dimming PIR (passive infrared) wall switch vacancy sensor.
- Line voltage lighting control (120/230/277 VAC, 50/60 Hz).
- 180° coverage pattern.
- Manual ON (Factory Setting).
- Partial ON can be adjusted from 10 to 70%.
- Partial OFF can be adjusted from 10 to 50%.
- Hold OFF or Force OFF light level feature.
- Mounts to a single-gang NEMA-style, standard switch box and decorator-style wall plate by others.
- Switch Link communication allows for up to 4 sensors to be grouped together.
- IQ Mode dynamically adjusts the ON time delay by learning individual room occupancy.
- Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds.
- Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected.
- Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF, DIM UP and DIM down buttons.
- The Button Link feature allows the installer to enable or disable communication of the DIM UP, ON/OFF and DIM DOWN manual button on the Switch Link communication traveler.
- Optional voltage barrier included to provide separation from class 1 and class 2 circuits.
- cUL/UL Listed, RoHS Compliant.
- 5 Year Warranty.
Similar In-Wall Occupancy & Motion Sensor Products
Free Shipping
$132.31Each
In Stock-
Ships between Dec. 26 - Dec. 30
Product Specifications
| Part Number | IR VS DIM-GY, 54898 |
| Certificate | cUL/UL Listed, RoHS Compliant |
| Inner Package | 1 |
| Maximum Voltage | 120V, 230V, 277V |
| Product Dimensions | 4.13-in X 1.74-in X 1.83-in |
| Weight | 0.30-lb |
Manufacturer Description
PIR, 0-10 Volt Dimming, Wall Switch Vacancy Sensor, 180 Coverage, 120/230/277 VAC, 50/60 Hz, Gray
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Steinel's PIR vacancy sensor wall switch with dimming has a gray finish and is used where the sensor will have a clear view of the occupants. For best performance use in enclosed spaces no larger than 18-ft x 15-ft. Shop HomElectrical today!
Free Shipping
$132.31Each
In Stock-
Ships between Dec. 26 - Dec. 30
Similar In-Wall Occupancy & Motion Sensor Products
Steinel IR VS DIM-GY Description
- Gray.
- 0-800W for tungsten, magnetic or electronic ballast; 0-600W for CFL or LED electronic ballasts.
- 0-10 volt dimming PIR (passive infrared) wall switch vacancy sensor.
- Line voltage lighting control (120/230/277 VAC, 50/60 Hz).
- 180° coverage pattern.
- Manual ON (Factory Setting).
- Partial ON can be adjusted from 10 to 70%.
- Partial OFF can be adjusted from 10 to 50%.
- Hold OFF or Force OFF light level feature.
- Mounts to a single-gang NEMA-style, standard switch box and decorator-style wall plate by others.
- Switch Link communication allows for up to 4 sensors to be grouped together.
- IQ Mode dynamically adjusts the ON time delay by learning individual room occupancy.
- Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds.
- Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected.
- Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF, DIM UP and DIM down buttons.
- The Button Link feature allows the installer to enable or disable communication of the DIM UP, ON/OFF and DIM DOWN manual button on the Switch Link communication traveler.
- Optional voltage barrier included to provide separation from class 1 and class 2 circuits.
- cUL/UL Listed, RoHS Compliant.
- 5 Year Warranty.
Product Specifications
| Part Number | IR VS DIM-GY, 54898 |
| Certificate | cUL/UL Listed, RoHS Compliant |
| Inner Package | 1 |
| Maximum Voltage | 120V, 230V, 277V |
| Product Dimensions | 4.13-in X 1.74-in X 1.83-in |
| Weight | 0.30-lb |
Manufacturer Description
PIR, 0-10 Volt Dimming, Wall Switch Vacancy Sensor, 180 Coverage, 120/230/277 VAC, 50/60 Hz, Gray
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
Product Questions & Answers
Customer Reviews
Need Assistance?