Enerlites White Plastic Wireless 120/240V Smart Duplex Receptacle

Enerlites PL20R-W
SKU ENL-PL20R
This smart receptacle is designed to be used with the ENL-PLBPC passive infrared sensor. The lower face of the receptacle only turns on if the sensor has detected any movement within the last 30 minutes.
Enerlites White Plastic Wireless 120/240V Smart Duplex Receptacle

Image may not depict product actual color, inclusions or accessories

This smart receptacle is designed to be used with the ENL-PLBPC passive infrared sensor. The lower face of the receptacle only turns on if the sensor has detected any movement within the last 30 minutes.

Enerlites White Plastic Wireless 120/240V Smart Duplex Receptacle features:

  • RF low profile Passive Infrared Ceiling Sensor.
  • Operates in a quiet 315MHz.
  • Compliant with Part 15 of FCC rules.
  • One PIR Sensor can pair up to 6 smart receptacles.
  • Simple three steps pairing process.
  • Controls both 120VAC and 240VAC split receptacles.
  • LED indicator light and manual override.
  • TAer Resistant Shutters.
  • Wireless PIR Sensor powered by two AA Lithium battery for zero utility cost and making it easy to install with little to no interruption to operations -- ideal for retrofits.
  • Split duplex receptacle with one uncontrolled and one wireless controlled for ON/OFF control of lAs, electronic devices, and appliances.
  • Easy Retrofit installation with No Additional Control Wiring.
  • Controlled receptacles with permanent marking to differentiate them from uncontrolled receptacles.
  • Vacancy sensing controls 30 minutes after the guest room has been Volt Alternating Currentated,power is switched off.
  • There is no need for remotes, computers, software and any other device to set up the controlled receptacle and the sensor.

Enerlites PL20R-W Description

Enerlites White Plastic Wireless 120/240V Smart Duplex Receptacle features:

  • RF low profile Passive Infrared Ceiling Sensor.
  • Operates in a quiet 315MHz.
  • Compliant with Part 15 of FCC rules.
  • One PIR Sensor can pair up to 6 smart receptacles.
  • Simple three steps pairing process.
  • Controls both 120VAC and 240VAC split receptacles.
  • LED indicator light and manual override.
  • TAer Resistant Shutters.
  • Wireless PIR Sensor powered by two AA Lithium battery for zero utility cost and making it easy to install with little to no interruption to operations -- ideal for retrofits.
  • Split duplex receptacle with one uncontrolled and one wireless controlled for ON/OFF control of lAs, electronic devices, and appliances.
  • Easy Retrofit installation with No Additional Control Wiring.
  • Controlled receptacles with permanent marking to differentiate them from uncontrolled receptacles.
  • Vacancy sensing controls 30 minutes after the guest room has been Volt Alternating Currentated,power is switched off.
  • There is no need for remotes, computers, software and any other device to set up the controlled receptacle and the sensor.
Free Shipping Eligible
$34.99Each
In Stock-

Ships by Monday, Dec. 23.

Product Specifications

Part NumberPL20R-W
Color / FinishWhite
MaterialThermoplastic
Maximum Amperage20 Amp
Maximum Voltage120V/240V
Number of Gangs1
Outlet TypeSingle
Sealed BatteryNo
Tamper ResistantNo
Warranty2 Yr
Weight0.25-lb
UPC883951450267
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.
This smart receptacle is designed to be used with the ENL-PLBPC passive infrared sensor. The lower face of the receptacle only turns on if the sensor has detected any movement within the last 30 minutes.
Enerlites White Plastic Wireless 120/240V Smart Duplex Receptacle
Free Shipping Eligible
$34.99Each
In Stock-

Ships by Monday, Dec. 23.

Enerlites PL20R-W Description

Enerlites White Plastic Wireless 120/240V Smart Duplex Receptacle features:

  • RF low profile Passive Infrared Ceiling Sensor.
  • Operates in a quiet 315MHz.
  • Compliant with Part 15 of FCC rules.
  • One PIR Sensor can pair up to 6 smart receptacles.
  • Simple three steps pairing process.
  • Controls both 120VAC and 240VAC split receptacles.
  • LED indicator light and manual override.
  • TAer Resistant Shutters.
  • Wireless PIR Sensor powered by two AA Lithium battery for zero utility cost and making it easy to install with little to no interruption to operations -- ideal for retrofits.
  • Split duplex receptacle with one uncontrolled and one wireless controlled for ON/OFF control of lAs, electronic devices, and appliances.
  • Easy Retrofit installation with No Additional Control Wiring.
  • Controlled receptacles with permanent marking to differentiate them from uncontrolled receptacles.
  • Vacancy sensing controls 30 minutes after the guest room has been Volt Alternating Currentated,power is switched off.
  • There is no need for remotes, computers, software and any other device to set up the controlled receptacle and the sensor.

Product Specifications

Part NumberPL20R-W
Color / FinishWhite
MaterialThermoplastic
Maximum Amperage20 Amp
Maximum Voltage120V/240V
Number of Gangs1
Outlet TypeSingle
Sealed BatteryNo
Tamper ResistantNo
Warranty2 Yr
Weight0.25-lb
UPC883951450267
Prop65
Important PROP 65 InformationWarning: This product can expose you to chemicals, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov. to CA residents.

Product Questions & Answers

Customer Reviews

0 out of 5
5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%
Need Assistance?