Eaton Wiring Z-Wave Plus Universal Dimmer w/Presets & LED, Black

Eaton Wiring Z-Wave Plus Universal Dimmer w/Presets & LED, Black features:

• Single pole, multi-location.
• 120V/AC, 60Hz.
• Rated for all common lighting loads - dimmable LED, dimmable CFL, INC/HAL, ELV, MLV, FLR.
• Rated for use with 300W of dimmable LED or CFL, and 600W of incandescent, magnetic low-voltage, electronic low-voltage and dimmable fluorescent.
• Adjustable low-end and high-end dimming range to prevent lamp flickering.
• No de-rating required in multi-gang installations.
• Compatible with Z-Wave Plus accessory dimmer (RF9642-Z) for wireless 3-way control, eliminating the need for traditional 3-way wiring or dedicated traveler wire.
• Neutral wire required for installation.
• Child lockout feature which disables local control at switch.
• Can be associated with up to 5 other devices.
• Programmable rapid and delayed fading up to 2 minutes (default is 10 seconds).
• Electro-mechanical push pad for ON/OFF operation with separate DIM/BRIGHT bar.
• Dimmable seven step blue dimmable LED display alongside push pad indicates selected light level and reduces brightness when OFF (nightlight feature).
• Air-gap switch disconnects power from load forcing an OFF condition.
• Adjustable ramp rate (up to 2 minutes) for safety and convenience.
• Pressing and holding push pad for 2 seconds brings light to full brightness without affecting preset levels.
• Color Finish: Black.